|
|
|
National Stock Number:
5910-00-827-1749
Federal Supply Class:
5910
National Item Identification Number:
008271749
Description:
CAPACITOR,FIXED,PLASTIC DIELECTR
Detail:
A capacitor whose capacitance value cannot be adjusted or varied, having a plastic, plastic film, plasticized (plastic impregnated) paper, or any combination of plastic and paper or plastic and paper films as the dielectric material. The plastic may be one or more types of synthetic compounds such as polyesters, polyfluorides, polycabonates, and the like. It may be a single unit, or consist of two or more fixed units which cannot be separated. For items whose electrodes consist of a metallic film deposited (metallized) on the dielectric material, see CAPACITOR, FIXED, METALLIZED, PAPER-PLASTIC DIELECTRIC.
|
Manufacturer Information:
| 2DE1-272E | 99515 | ELECTRON PRODUCTS INC | | 695526-6 | 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER | | L605010336 | 36090 | LOCKHEED MARTIN LIBRASCOPE CORP | | REK1-272 | 96733 | SFE TECHNOLOGIES |
|
Techincal Specification:
| BODY HEIGHT | 0.300 INCHES MAXIMUM | | BODY LENGTH | 0.450 INCHES MAXIMUM | | BODY STYLE | W/O MTG FACILITIES, TERMINALS ON OPPOSITE SURFACES | | BODY WIDTH | 0.180 INCHES MAXIMUM | | CAPACITANCE VALUE PER SECTION | 2700.000 PICOFARADS SINGLE SECTION | | CRITICALITY CODE JUSTIFICATION | TEST | | DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT | 1.0000 | | INSULATION RESISTANCE AT REFERENCE TEMP | 10000.0 MEGOHM-MICROFARADS | | MATERIAL | PLASTIC CASE | | NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | 100.0 DC SINGLE SECTION | | NONDERATED OPERATING TEMP | -55.0 CELSIUS MINIMUM AND 85.0 CELSIUS MAXIMUM | | RELIABILITY INDICATOR | NOT ESTABLISHED | | SCHEMATIC DIAGRAM DESIGNATOR | NO COMMON OR GROUNDED ELECTRODE(S) | | TERMINAL LENGTH | 1.000 INCHES MINIMUM | | TERMINAL SURFACE TREATMENT | SOLDER | | TERMINAL TYPE AND QUANTITY | 2 UNINSULATED WIRE LEAD | | TEST DATA DOCUMENT | 10001-695526 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) | | TOLERANCE RANGE PER SECTION | -10.00 TO 10.00 PERCENT SINGLE SECTION |
|
|