|
|
|
National Stock Number:
5910-00-832-5901
Federal Supply Class:
5910
National Item Identification Number:
008325901
Description:
CAPACITOR,FIXED,PLASTIC DIELECTR
Detail:
A capacitor whose capacitance value cannot be adjusted or varied, having a plastic, plastic film, plasticized (plastic impregnated) paper, or any combination of plastic and paper or plastic and paper films as the dielectric material. The plastic may be one or more types of synthetic compounds such as polyesters, polyfluorides, polycabonates, and the like. It may be a single unit, or consist of two or more fixed units which cannot be separated. For items whose electrodes consist of a metallic film deposited (metallized) on the dielectric material, see CAPACITOR, FIXED, METALLIZED, PAPER-PLASTIC DIELECTRIC.
|
Manufacturer Information:
| 738830 | 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER | | 738830 | 53749 | SOUTHERN ELECTRONICS CO INC | | AX5966 | 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER | | BUWEPSDWG738830 | 16624 | NAVAL RESERVE CENTER |
|
Techincal Specification:
| BODY HEIGHT | 2.500 INCHES MAXIMUM | | BODY LENGTH | 2.000 INCHES NOMINAL | | BODY STYLE | W/MTG TABS/FLANGES TERMINAL(S) ON ONE SURFACE | | BODY WIDTH | 2.000 INCHES NOMINAL | | CAPACITANCE VALUE PER SECTION | 20.000 MICROFARADS SINGLE SECTION | | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH | 2.375 INCHES NOMINAL | | DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT | 1.0000 | | FEATURES PROVIDED | HERMETICALLY SEALED CASE | | INSULATION RESISTANCE AT REFERENCE TEMP | 12000.0 MEGOHM-MICROFARADS | | MATERIAL | PLASTIC CASE | | MOUNTING FACILITY TYPE AND QUANTITY | 2 UNTHREADED MOUNTING HOLES | | NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | 400.0 DC SINGLE SECTION | | NONDERATED OPERATING TEMP | -55.0 CELSIUS MINIMUM AND 85.0 CELSIUS MAXIMUM | | RELIABILITY INDICATOR | NOT ESTABLISHED | | SCHEMATIC DIAGRAM DESIGNATOR | NO COMMON OR GROUNDED ELECTRODE(S) | | TERMINAL TYPE AND QUANTITY | 2 TAB, SOLDER LUG | | TERMINAL SURFACE TREATMENT | SOLDER | | TEST DATA DOCUMENT | 10001-738830 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) | | TOLERANCE RANGE PER SECTION | -5.00 TO 5.00 PERCENT SINGLE SECTION | | UNTHREADED MOUNTING HOLE DIAMETER | 0.156 INCHES NOMINAL |
|
|