|
|
|
National Stock Number:
5910-00-856-6593
Federal Supply Class:
5910
National Item Identification Number:
008566593
Description:
CAPACITOR,FIXED,PAPER DIELECTRIC
Detail:
A capacitor whose capacitance value cannot be adjusted or varied, having paper as the dielectric material. It may be a single unit or consist of two or more fixed units which cannot be seperated. For items whose dielectric material consist of plasticized (plastic impregnated) paper or paper-plastic combinations, see CAPACITOR, FIXED, PLASTIC DIELECTRIC. For items whose electrodes consist of a metallic film deposited (metallized) on the dielectric material, see CAPACITOR, FIXED, METALIZED, PAPER-PLASTIC DIELECTRIC.
|
Manufacturer Information:
| 1126B06C5 | 13050 | SPECTRUM CONTROL, INC. DIV API TECHNOLOGIES - EIS/WESSON | | 1126B06C5 | 81668 | POTTER FIRE ESCAPE CO | | B06C5 | 13050 | SPECTRUM CONTROL, INC. DIV API TECHNOLOGIES - EIS/WESSON | | B06C5 | 81668 | POTTER FIRE ESCAPE CO | | 679-000 | 82386 | JAIDINGER MANUFACTURING CO INC | | 679-304 | 82386 | JAIDINGER MANUFACTURING CO INC |
|
Techincal Specification:
| BODY HEIGHT | 1.125 INCHES NOMINAL | | BODY LENGTH | 2.000 INCHES NOMINAL | | BODY STYLE | W/MTG TABS/FLANGES, TERMINAL(S) ON ONE SURFACE | | BODY WIDTH | 2.000 INCHES NOMINAL | | CAPACITANCE VALUE PER SECTION | 0.500 MICROFARADS 1ST SECTION AND 0.500 MICROFARADS 2ND SECTION AND 0.500 MICROFARADS 3RD SECTION | | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH | 2.375 INCHES NOMINAL | | FEATURES PROVIDED | HERMETICALLY SEALED CASE | | MOUNTING FACILITY TYPE AND QUANTITY | 2 UNTHREADED MOUNTING HOLES | | NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | 600.0 DC ALL SECTIONS | | NONDERATED OPERATING TEMP | -55.0 CELSIUS MINIMUM AND 85.0 CELSIUS MAXIMUM | | RELIABILITY INDICATOR | NOT ESTABLISHED | | SCHEMATIC DIAGRAM DESIGNATOR | ELECTRODE(S) GROUNDED TO CASE | | SECTION QUANTITY | 3 | | TERMINAL TYPE AND QUANTITY | 3 TAB, SOLDER LUG | | TEST DATA DOCUMENT | 82368-679-000 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) | | TOLERANCE RANGE PER SECTION | -10.00 TO 10.00 PERCENT 1ST SECTION AND -10.00 TO 10.00 PERCENT 2ND SECTION AND -10.00 TO 10.00 PERCENT 3RD SECTION | | UNTHREADED MOUNTING HOLE DIAMETER | 0.188 INCHES NOMINAL |
|
|