|
|
|
National Stock Number:
5910-00-928-1966
Federal Supply Class:
5910
National Item Identification Number:
009281966
Description:
CAPACITOR,FIXED,PLASTIC DIELECTR
Detail:
A capacitor whose capacitance value cannot be adjusted or varied, having a plastic, plastic film, plasticized (plastic impregnated) paper, or any combination of plastic and paper or plastic and paper films as the dielectric material. The plastic may be one or more types of synthetic compounds such as polyesters, polyfluorides, polycabonates, and the like. It may be a single unit, or consist of two or more fixed units which cannot be separated. For items whose electrodes consist of a metallic film deposited (metallized) on the dielectric material, see CAPACITOR, FIXED, METALLIZED, PAPER-PLASTIC DIELECTRIC.
|
Manufacturer Information:
| 521-1397 | 81867 | ELECTRONIC ASSOCIATES INC | | P188747 | 56289 | SPRAGUE ELECTRIC CO WORLD HQS | | TWP167 | 00853 | CORNELL-DUBILIER MARKETING INC | | TWP167 | 14655 | CORNELL-DUBILIER ELECTRONICS | | SMB527511-3 | 80063 | US ARMY COMMUNICATIONS & ELECTRONICS MATERIEL READINESS COMMAND LOGISTICS ENGINEERING DIR |
|
Techincal Specification:
| BODY DIAMETER | 0.420 INCHES NOMINAL | | BODY LENGTH | 1.125 INCHES NOMINAL | | BODY STYLE | W/O MTG FACILITIES, AXIAL TERMINALS | | CAPACITANCE VALUE PER SECTION | 0.100 MICROFARADS SINGLE SECTION | | CASE INSULATION MATERIAL | PLASTIC | | NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | 50.0 DC SINGLE SECTION | | NONDERATED OPERATING TEMP | -55.0 CELSIUS MINIMUM AND 85.0 CELSIUS MAXIMUM | | RELIABILITY INDICATOR | NOT ESTABLISHED | | SCHEMATIC DIAGRAM DESIGNATOR | NO COMMON OR GROUNDED ELECTRODE(S) | | TEMP COEFFICIENT OF CAPACITANCE PER SECTION IN PPM PER DEG CELSIUS | -120.0 SINGLE SECTION | | TERMINAL LENGTH | 1.625 INCHES MINIMUM | | TERMINAL DIAMETER | 0.025 INCHES NOMINAL | | TERMINAL SURFACE TREATMENT | SOLDER | | TERMINAL TYPE AND QUANTITY | 2 UNINSULATED WIRE LEAD | | TOLERANCE OF TEMP COEFFICIENT PER SECTION IN PPM PER DEG CELSIUS | -30.0 TO 30.0 SINGLE SECTION | | TOLERANCE RANGE PER SECTION | -1.00 TO 1.00 PERCENT SINGLE SECTION |
|
|