| ADJUSTMENT DEVICE DRIVE TYPE AND QUANTITY | 1 SHAFT |
| BODY LENGTH | 0.281 INCHES NOMINAL |
| BODY STYLE | PISTON |
| CAPACITANCE RANGE IN PICOFARADS | +0.35 TO 3.50 SINGLE SECTION |
| CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH | 0.266 INCHES NOMINAL |
| FRAGILITY FACTOR | MODERATELY RUGGED |
| INCLOSURE TYPE | UNINCLOSED |
| OVERALL DIAMETER | 0.140 INCHES NOMINAL |
| OVERALL LENGTH | 0.500 INCHES NOMINAL |
| MOUNTING FACILITY TYPE AND QUANTITY | 2 TERMINAL |
| NONDERATED OPERATING TEMP | -55.0 CELSIUS MINIMUM AND 125.0 CELSIUS MAXIMUM |
| NONDERATED VOLTAGE RATING AND TYPE | 250.0 DC CONTINUOUS SINGLE SECTION |
| QUALITY FACTOR AT 25 DEG CELSIUS | 5000.0 |
| SHAFT DIAMETER | 0.120 INCHES NOMINAL SINGLE SHAFT |
| SHAFT LENGTH | 0.188 INCHES MINIMUM AND 0.140 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT TYPE | ROUND, SLOTTED SINGLE SHAFT |
| SUPPLEMENTARY FEATURES | 18JAN01 ITEM REVIEWED UNDER GIRDER PROJECT. ZB AND ZG NON-CONCUR CANCELLATION ACTION |
| TEMP COEFFICIENT OF CAPACITANCE IN PPM PER DEG CELSIUS | 50.0 SINGLE SECTION |
| TERMINAL LENGTH | 0.171 INCHES MINIMUM AND 0.234 INCHES MAXIMUM |
| TERMINAL TYPE AND QUANTITY | 2 WIRE LEAD |
| TERMINAL THICKNESS | 0.010 INCHES NOMINAL |
| TEST DATA DOCUMENT | 90073-202-001 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| TOLERANCE OF TEMP COEFFICIENT IN PPM PER DEG CELSIUS | -50.0 TO 50.0 SINGLE SECTION |
| TUNING CHARACTERISTIC | STRAIGHT LINE CAPACITY SINGLE SECTION |