|
|
|
National Stock Number:
5910-00-937-9722
Federal Supply Class:
5910
National Item Identification Number:
009379722
Description:
CAPACITOR,FIXED,PLASTIC DIELECTR
Detail:
A capacitor whose capacitance value cannot be adjusted or varied, having a plastic, plastic film, plasticized (plastic impregnated) paper, or any combination of plastic and paper or plastic and paper films as the dielectric material. The plastic may be one or more types of synthetic compounds such as polyesters, polyfluorides, polycabonates, and the like. It may be a single unit, or consist of two or more fixed units which cannot be separated. For items whose electrodes consist of a metallic film deposited (metallized) on the dielectric material, see CAPACITOR, FIXED, METALLIZED, PAPER-PLASTIC DIELECTRIC.
|
Manufacturer Information:
| 336852 | 56232 | LOCKHEED MARTIN CORPORATION | | K1147 | 53749 | SOUTHERN ELECTRONICS CO INC | | K1147 | 84171 | RHEINLANDER, ROBERT M |
|
Techincal Specification:
| BODY HEIGHT | 1.438 INCHES NOMINAL | | BODY LENGTH | 2.000 INCHES NOMINAL | | BODY STYLE | W/THD MTG HOLE(S)/STUD(S), TERMINAL(S) ON ONE SURFACE | | BODY WIDTH | 0.750 INCHES NOMINAL | | CAPACITANCE VALUE PER SECTION | 4000.0000 PICOFARADS ALL SECTIONS | | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | 0.813 INCHES NOMINAL | | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH | 1.375 INCHES NOMINAL | | FEATURES PROVIDED | HERMETICALLY SEALED CASE | | MOUNTING FACILITY TYPE AND QUANTITY | 2 THREADED MOUNTING HOLES | | MOUNTING FACILITY SCREW THREAD SERIES DESIGNATOR | UNC | | NOMINAL THREAD SIZE | 0.112 INCHES | | NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | 100.0 DC ALL SECTIONS | | NONDERATED OPERATING TEMP | -55.0 CELSIUS MINIMUM AND 85.0 CELSIUS MAXIMUM | | RELIABILITY INDICATOR | NOT ESTABLISHED | | SCHEMATIC DIAGRAM DESIGNATOR | ONE TERMINAL COMMON TO EACH SECTION | | SECTION QUANTITY | 2 | | TERMINAL LENGTH | 0.562 INCHES NOMINAL | | TERMINAL TYPE AND QUANTITY | 3 STANDARD TUBE BASE | | TEST DATA DOCUMENT | 56232-336852 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) | | TOLERANCE RANGE PER SECTION | -1.00 TO 1.00 PERCENT 1ST SECTION AND -1.00 TO 1.00 PERCENT 2ND SECTION |
|
|