| ADJUSTMENT DEVICE DRIVE TYPE AND QUANTITY | 1 SHAFT |
| ADJUSTMENT DEVICE TORQUE | 2.000 INCH-OUNCES MINIMUM AND 10.000 INCH-OUNCES MAXIMUM |
| BODY LENGTH | 0.547 INCHES NOMINAL |
| BODY STYLE | PLATE-MESHING |
| CAPACITANCE RANGE IN PICOFARADS | +1.54 TO 8.90 SINGLE SECTION |
| DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH | 0.375 INCHES NOMINAL |
| FRAGILITY FACTOR | MODERATELY RUGGED |
| INCLOSURE TYPE | ENCASED |
| INSULATION DC RESISTANCE AT 25 DEG CELSIUS | 50000.0 MEGOHMS |
| OVERALL HEIGHT | 0.441 INCHES MINIMUM AND 0.461 INCHES MAXIMUM |
| OVERALL LENGTH | 0.828 INCHES NOMINAL |
| OVERALL WIDTH | 0.421 INCHES MINIMUM AND 0.445 INCHES MAXIMUM |
| MATERIAL | STEATITE INCLOSURE |
| MOUNTING FACILITY TYPE AND QUANTITY | 2 UNTHREADED HOLE |
| NONDERATED VOLTAGE RATING AND TYPE | 750.0 DC PEAK SINGLE SECTION |
| NONDERATED OPERATING TEMP | -55.0 CELSIUS MINIMUM AND 85.0 CELSIUS MAXIMUM |
| PLATE AIR GAP | 0.010 INCHES |
| PLATE QUANTITY | 8 |
| PRECIOUS MATERIAL | SILVER |
| PRECIOUS MATERIAL AND LOCATION | TERMIANL SURFACES SILVER |
| QUALITY FACTOR AT 25 DEG CELSIUS | 1000.0 |
| SHAFT DIAMETER | 0.082 INCHES NOMINAL SINGLE SHAFT |
| SHAFT LENGTH | 0.281 INCHES NOMINAL SINGLE SHAFT |
| SHAFT TYPE | ROUND, SLOTTED SINGLE SHAFT |
| TEMP COEFFICIENT OF CAPACITANCE IN PPM PER DEG CELSIUS | 50.0 SINGLE SECTION |
| TERMINAL LOCATION | ADJUSTMENT CONTROL END PERPENDICULAR |
| TERMINAL LENGTH | 0.272 INCHES MINIMUM AND 0.352 INCHES MAXIMUM |
| TERMINAL TYPE AND QUANTITY | 2 TAB, SOLDER LUG |
| TOLERANCE OF TEMP COEFFICIENT IN PPM PER DEG CELSIUS | -25.0 TO 25.0 SINGLE SECTION |
| TUNING CHARACTERISTIC | STRAIGHT LINE CAPACITY SINGLE SECTION |
| UNTHREADED MOUNTING HOLE DIAMETER | 0.086 INCHES NOMINAL |