| BODY DIAMETER | 0.290 INCHES MAXIMUM |
| BODY LENGTH | 0.135 INCHES MAXIMUM |
| BODY STYLE | W/O MTG FACILITIES, RADIAL TERMINALS |
| CAPACITANCE VALUE PER SECTION | 13.000 PICOFARADS SINGLE SECTION |
| CASE INSULATION MATERIAL | PLASTIC |
| CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO DIAMETER | 0.219 INCHES MINIMUM AND 0.281 INCHES MAXIMUM |
| INSULATION RESISTANCE AT REFERENCE TEMP | 7500.0 MEGOHMS |
| MATERIAL | CERAMIC CASE |
| NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | 250.0 DC SINGLE SECTION |
| NONDERATED OPERATING TEMP | -40.0 CELSIUS MINIMUM AND 85.0 CELSIUS MAXIMUM |
| QUALITY FACTOR AT REFERENCE TEMP | 640.0000 |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| SCHEMATIC DIAGRAM DESIGNATOR | NO COMMON OR GROUNDED ELECTRODE(S) |
| TEMP COEFFICIENT OF CAPACITANCE PER SECTION IN PPM PER DEG CELSIUS | -150.0 SINGLE SECTION |
| TERMINAL LENGTH | 1.000 INCHES MINIMUM |
| TERMINAL TYPE AND QUANTITY | 2 UNINSULATED WIRE LEAD |
| TERMINAL SURFACE TREATMENT | SOLDER |
| TEST DATA DOCUMENT | 01537-21D82610C DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| TOLERANCE OF TEMP COEFFICIENT PER SECTION IN PPM PER DEG CELSIUS | -30.0 TO 30.0 SINGLE SECTION |
| TOLERANCE RANGE PER SECTION | -5.00 TO 5.00 PERCENT SINGLE SECTION |