|
|
|
National Stock Number:
5910-00-980-0398
Federal Supply Class:
5910
National Item Identification Number:
009800398
Description:
CAPACITOR,FIXED,PLASTIC DIELECTR
Detail:
A capacitor whose capacitance value cannot be adjusted or varied, having a plastic, plastic film, plasticized (plastic impregnated) paper, or any combination of plastic and paper or plastic and paper films as the dielectric material. The plastic may be one or more types of synthetic compounds such as polyesters, polyfluorides, polycabonates, and the like. It may be a single unit, or consist of two or more fixed units which cannot be separated. For items whose electrodes consist of a metallic film deposited (metallized) on the dielectric material, see CAPACITOR, FIXED, METALLIZED, PAPER-PLASTIC DIELECTRIC.
|
Manufacturer Information:
| 1563076-13 | 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER | | 1563076-13 | 30003 | NAVAL AIR SYSTEMS COMMAND MANAGED ORIGINAL DESIGN ACTIVITY NOT MATERIAL/PARTS SUPPLIER |
|
Techincal Specification:
| BODY HEIGHT | 0.440 INCHES MAXIMUM | | BODY LENGTH | 0.820 INCHES NOMINAL | | BODY STYLE | W/O MTG FACILITIES, TERMINAL(S) ON ONE SURFACE | | BODY WIDTH | 0.300 INCHES NOMINAL | | CAPACITANCE VALUE PER SECTION | 0.750 MICROFARADS SINGLE SECTION | | CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH | 0.600 INCHES NOMINAL | | DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT | 1.0000 | | INSULATION RESISTANCE AT MAXIMUM OPERATING TEMP | 30.0 MEGOHMS | | INSULATION RESISTANCE AT REFERENCE TEMP | 30000.0 MEGOHMS | | MATERIAL | PLASTIC CASE | | NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | 100.0 DC SINGLE SECTION | | NONDERATED OPERATING TEMP | -55.0 CELSIUS MINIMUM AND 85.0 CELSIUS MAXIMUM | | RELIABILITY INDICATOR | NOT ESTABLISHED | | SCHEMATIC DIAGRAM DESIGNATOR | NO COMMON OR GROUNDED ELECTRODE(S) | | TERMINAL DIAMETER | 0.025 INCHES NOMINAL | | TERMINAL LENGTH | 1.000 INCHES MINIMUM | | TERMINAL TYPE AND QUANTITY | 2 UNINSULATED WIRE LEAD | | TERMINAL SURFACE TREATMENT | SOLDER | | TEST DATA DOCUMENT | 10001-1563076 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) | | TOLERANCE RANGE PER SECTION | -5.00 TO 5.00 PERCENT SINGLE SECTION |
|
|