| BODY HEIGHT | 17.930 INCHES NOMINAL |
| BODY LENGTH | 18.000 INCHES NOMINAL |
| BODY STYLE | W/MTG TABS/FLANGES TERMINAL(S) ON ONE SURFACE |
| BODY WIDTH | 8.120 INCHES NOMINAL |
| CAPACITANCE VALUE PER SECTION | 13800.000 PICOFARADS ALL SECTIONS |
| CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH | 13.180 INCHES MINIMUM AND 13.300 INCHES MAXIMUM |
| DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH | 20.563 INCHES NOMINAL |
| FEATURES PROVIDED | MOUNTING HARDWARE AND HERMETICALLY SEALED CASE |
| MOUNTING FACILITY TYPE AND QUANTITY | 18 UNTHREADED MOUNTING HOLES |
| NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | 30000.0 DC ALL SECTIONS |
| NONDERATED OPERATING TEMP | -54.0 CELSIUS MINIMUM AND 52.0 CELSIUS MAXIMUM |
| POWER FACTOR AT REFERENCE TEMP IN PERCENT | 0.2500 |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| SCHEMATIC DIAGRAM DESIGNATOR | ONE TERMINAL COMMON TO EACH SECTION |
| SECTION QUANTITY | 4 |
| TERMINAL HEIGHT FROM BODY | 3.000 INCHES NOMINAL |
| TERMINAL TYPE AND QUANTITY | 5 THREADED STUD |
| TEST DATA DOCUMENT | 18876-9994344 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| TOLERANCE RANGE PER SECTION | -3.00 TO 7.00 PERCENT 1ST SECTION AND -3.00 TO 7.00 PERCENT 2ND SECTION AND -3.00 TO 7.00 PERCENT 3RD SECTION AND -3.00 TO 7.00 PERCENT 4TH SECTION |
| UNTHREADED MOUNTING HOLE DIAMETER | 0.438 INCHES NOMINAL |