|
|
|
National Stock Number:
5910-00-989-7153
Federal Supply Class:
5910
National Item Identification Number:
009897153
Description:
CAPACITOR,FIXED,PLASTIC DIELECTR
Detail:
A capacitor whose capacitance value cannot be adjusted or varied, having a plastic, plastic film, plasticized (plastic impregnated) paper, or any combination of plastic and paper or plastic and paper films as the dielectric material. The plastic may be one or more types of synthetic compounds such as polyesters, polyfluorides, polycabonates, and the like. It may be a single unit, or consist of two or more fixed units which cannot be separated. For items whose electrodes consist of a metallic film deposited (metallized) on the dielectric material, see CAPACITOR, FIXED, METALLIZED, PAPER-PLASTIC DIELECTRIC.
|
Manufacturer Information:
| 11065352-005 | 18876 | U S ARMY AVIATION AND MISSILE COMMAND | | 1507-106997 | 89536 | FLUKE CORP | | 6105161 | 03640 | LOCKHEED MARTIN CORPORATION | | 210B1C505K | 14752 | ELECTROCUBE, INC. | | CF57 | 89536 | FLUKE CORP | | D2-505D | 99515 | ELECTRON PRODUCTS INC | | ZDA7343-141 | 12406 | ELPAC ELECTRONICS INC | | IF28 | 84411 | AMERICAN SHIZUKI CORP | | EP35088 | 99515 | ELECTRON PRODUCTS INC |
|
Techincal Specification:
| BODY HEIGHT | 0.930 INCHES MAXIMUM | | BODY LENGTH | 1.730 INCHES MAXIMUM | | BODY STYLE | W/O MTG FACILITIES, TERMINALS ON OPPOSITE SURFACES | | BODY WIDTH | 0.690 INCHES MAXIMUM | | CAPACITANCE VALUE PER SECTION | 5.000 MICROFARADS SINGLE SECTION | | DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT | 1.0000 | | INSULATION RESISTANCE AT REFERENCE TEMP | 10000.0 MEGOHM-MICROFARADS | | MATERIAL | PLASTIC CASE | | NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | 200.0 DC SINGLE SECTION | | NONDERATED OPERATING TEMP | -30.0 CELSIUS MINIMUM AND 85.0 CELSIUS MAXIMUM | | RELIABILITY INDICATOR | NOT ESTABLISHED | | SCHEMATIC DIAGRAM DESIGNATOR | NO COMMON OR GROUNDED ELECTRODE(S) | | TEMP COEFFICIENT OF CAPACITANCE PER SECTION IN PPM PER DEG CELSIUS | 0.0 SINGLE SECTION | | TERMINAL DIAMETER | 0.032 INCHES NOMINAL | | TERMINAL LENGTH | 1.500 INCHES MINIMUM | | TERMINAL TYPE AND QUANTITY | 2 UNINSULATED WIRE LEAD | | TERMINAL SURFACE TREATMENT | SOLDER | | TOLERANCE OF TEMP COEFFICIENT PER SECTION IN PPM PER DEG CELSIUS | -6.0 TO 6.0 SINGLE SECTION | | TOLERANCE RANGE PER SECTION | -5.00 TO 5.00 PERCENT SINGLE SECTION |
|
|