| ADJUSTMENT DEVICE DRIVE TYPE AND QUANTITY | 1 SLOTTED SCREW |
| ADJUSTMENT DEVICE TORQUE | 0.500 INCH-OUNCES MINIMUM AND 6.000 INCH-OUNCES MAXIMUM |
| BODY LENGTH | 0.297 INCHES NOMINAL |
| BODY STYLE | PISTON |
| BUSHING DIAMETER | 0.234 INCHES NOMINAL |
| BUSHING LENGTH | 0.094 INCHES NOMINAL |
| BUSHING SHAPE | ROUND |
| CAPACITANCE DRIFT IN PICOFARADS | 0.01 SINGLE SECTION |
| CAPACITANCE RANGE IN PICOFARADS | +0.8 TO 10.0 SINGLE SECTION |
| CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO DIAMETER | 0.219 INCHES NOMINAL |
| CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH | 0.297 INCHES NOMINAL |
| INCLOSURE TYPE | ENCASED |
| INSULATION DC RESISTANCE AT 25 DEG CELSIUS | 1000.0 GIGOHMS |
| INSULATION DC RESISTANCE AT MAX OPERATING TEMP | 100.0 GIGOHMS |
| OVERALL DIAMETER | 0.281 INCHES NOMINAL |
| OVERALL LENGTH | 0.484 INCHES MAXIMUM |
| MOUNTING FACILITY TYPE AND QUANTITY | 1 THREADED BUSHING |
| MOUNTING FACILITY SCREW THREAD SERIES DESIGNATOR | UNS |
| NOMINAL THREAD SIZE | 0.234 INCHES |
| NONDERATED VOLTAGE RATING AND TYPE | 250.0 DC CONTINUOUS SINGLE SECTION |
| NONDERATED OPERATING TEMP | -65.0 CELSIUS MINIMUM AND 125.0 CELSIUS MAXIMUM |
| QUALITY FACTOR AT 25 DEG CELSIUS | 5000.0 |
| TEMP COEFFICIENT OF CAPACITANCE IN PPM PER DEG CELSIUS | 0.0 SINGLE SECTION |
| TERMINAL TYPE AND QUANTITY | 3 PIN |
| TEST DATA DOCUMENT | 81349-MIL-C-14409/13 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| THREAD QUANTITY PER INCH | 64 |
| TOLERANCE OF TEMP COEFFICIENT IN PPM PER DEG CELSIUS | -20.0 TO 20.0 SINGLE SECTION |
| TUNING CHARACTERISTIC | STRAIGHT LINE CAPACITY SINGLE SECTION |