|
|
|
National Stock Number:
5910-01-055-5620
Federal Supply Class:
5910
National Item Identification Number:
010555620
Description:
CAPACITOR,FIXED,PLASTIC DIELECTR
Detail:
A capacitor whose capacitance value cannot be adjusted or varied, having a plastic, plastic film, plasticized (plastic impregnated) paper, or any combination of plastic and paper or plastic and paper films as the dielectric material. The plastic may be one or more types of synthetic compounds such as polyesters, polyfluorides, polycabonates, and the like. It may be a single unit, or consist of two or more fixed units which cannot be separated. For items whose electrodes consist of a metallic film deposited (metallized) on the dielectric material, see CAPACITOR, FIXED, METALLIZED, PAPER-PLASTIC DIELECTRIC.
|
Manufacturer Information:
| 154336 | 21877 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | RC00060G474 | 13619 | EMS DEVELOPMENT CORPORATION | | RC60G474 | 13619 | EMS DEVELOPMENT CORPORATION |
|
Techincal Specification:
| BODY DIAMETER | 0.985 INCHES MINIMUM AND 1.015 INCHES MAXIMUM | | BODY LENGTH | 2.579 INCHES MINIMUM AND 2.671 INCHES MAXIMUM | | BODY STYLE | W/THD BUSHING MTG, TERMINALS ON OPPOSITE ENDS | | CAPACITANCE VALUE PER SECTION | 0.470 MICROFARADS SINGLE SECTION | | CASE INSULATION MATERIAL | PLASTIC | | CONTINUOUS CURRENT RATING IN AMPS | 20.0 | | FEATURES PROVIDED | HERMETICALLY SEALED CASE | | INSULATION RESISTANCE AT REFERENCE TEMP | 100.0 MEGOHMS | | MOUNTING FACILITY TYPE AND QUANTITY | 1 THREADED BUSHING | | MOUNTING FACILITY SCREW THREAD SERIES DESIGNATOR | UNF | | NOMINAL THREAD SIZE | 0.438 INCHES | | NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | 330.0 AC-RMS SINGLE SECTION AND 1000.0 DC SINGLE SECTION | | NONDERATED OPERATING TEMP | -55.0 CELSIUS MINIMUM AND 125.0 CELSIUS MAXIMUM | | RELIABILITY FAILURE RATE LEVEL IN PERCENT | 0.0001 | | RELIABILITY INDICATOR | ESTABLISHED | | SCHEMATIC DIAGRAM DESIGNATOR | FEEDTHROUGH | | TERMINAL LENGTH | 0.250 INCHES MAXIMUM | | TERMINAL TYPE AND QUANTITY | 2 STANDOFF, SOLDER LUG | | TOLERANCE RANGE PER SECTION | -0.20 TO 20.00 PERCENT SINGLE SECTION |
|
|