5910-01-122-6585 CAPACITOR,FIXED,CERAMIC DIELECTR Index 5910-01-122-6587 CAPACITOR,FIXED,ELECTROLYTIC

National Stock Number:
5910-01-122-6586

Federal Supply Class:
5910

National Item Identification Number:
011226586

Description:
CAPACITOR,FIXED,CERAMIC DIELECTR

Detail:
A capacitor, whose capacitance value cannot be adjusted or varied, having a ceramic dielectric. It may be a single unit, or consist of two or more fixed units which cannot be separated.


Manufacturer Information:
9BN100R751F26654VARADYNE INDUSTRIES INC
CCR05CG751FR81349MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SM-B-650928-280063US ARMY COMMUNICATIONS & ELECTRONICS MATERIEL READINESS COMMAND LOGISTICS ENGINEERING DIR
MIL-C-20/3581349MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
M25CG751F93958REPUBLIC ELECTRONICS CORP S INC


Techincal Specification:
CAPACITANCE VALUE PER SECTION750.000 PICOFARADS SINGLE SECTION
NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION100.0 DC SINGLE SECTION
SCHEMATIC DIAGRAM DESIGNATORNO COMMON OR GROUNDED ELECTRODE(S)
TEMP COEFFICIENT OF CAPACITANCE PER SECTION IN PPM PER DEG CELSIUS0.0 SINGLE SECTION
TOLERANCE OF TEMP COEFFICIENT PER SECTION IN PPM PER DEG CELSIUS-30.0 TO 30.0 SINGLE SECTION
BODY LENGTH0.190 INCHES NOMINAL
BODY WIDTH0.190 INCHES NOMINAL
BODY HEIGHT0.090 INCHES NOMINAL
TERMINAL LENGTH1.250 INCHES MINIMUM
TERMINAL DIAMETER0.020 INCHES MINIMUM AND
0.027 INCHES MAXIMUM
CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH0.200 INCHES NOMINAL
CASE MATERIALPLASTIC
INSULATION RESISTANCE AT REFERENCE TEMP100000.0 MEGOHMS
DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT0.1500
QUALITY FACTOR AT REFERENCE TEMP1000.0000
RELIABILITY FAILURE RATE LEVEL IN PERCENT0.0100
TEST DATA DOCUMENT81349-MIL-C-20 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
TERMINAL SURFACE TREATMENTSOLDER
INSULATION RESISTANCE AT MAXIMUM OPERATING TEMP10000.0 MEGOHMS
SPECIFICATION/STANDARD DATA81349-MIL-C-20/35 GOVERNMENT SPECIFICATION
SPEC/STD CONTROLLING DATA
DEFINITIVE GOVERNMENT SPEC/STD REFERENCECCR05CG751FR
MANUFACTURERS CODE81349
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCEMIL-C-20/35
TOLERANCE RANGE PER SECTION-1.00 TO 1.00 PERCENT SINGLE SECTION
NONDERATED OPERATING TEMP-55.0 DEG CELSIUS MINIMUM AND
125.0 DEG CELSIUS MAXIMUM
TERMINAL TYPE AND QUANTITY2 UNINSULATED WIRE LEAD
RELIABILITY INDICATORESTABLISHED
BODY STYLEW/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE


Click here to Register for Free 30-day Trial