|
|
|
National Stock Number:
5910-01-139-0092
Federal Supply Class:
5910
National Item Identification Number:
011390092
Description:
CAPACITOR,FIXED,PLASTIC DIELECTR
Detail:
A capacitor whose capacitance value cannot be adjusted or varied, having a plastic, plastic film, plasticized (plastic impregnated) paper, or any combination of plastic and paper or plastic and paper films as the dielectric material. The plastic may be one or more types of synthetic compounds such as polyesters, polyfluorides, polycabonates, and the like. It may be a single unit, or consist of two or more fixed units which cannot be separated. For items whose electrodes consist of a metallic film deposited (metallized) on the dielectric material, see CAPACITOR, FIXED, METALLIZED, PAPER-PLASTIC DIELECTRIC.
|
Manufacturer Information:
| 10540W | 13058 | SORA POWER INC. | | 2938639 | 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER | | 60W343TN | 10026 | CSI TECHNOLOGIES, INC. | | 2938639 | 13058 | SORA POWER INC. | | 2938639-1 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 2E603-105A | 58364 | BYCAP INC | | RC00942 | 13619 | EMS DEVELOPMENT CORPORATION | | RC942 | 13619 | EMS DEVELOPMENT CORPORATION |
|
Techincal Specification:
| BODY HEIGHT | 16.650 INCHES MAXIMUM | | BODY LENGTH | 13.530 INCHES MAXIMUM | | BODY STYLE | FLAT PACK | | BODY WIDTH | 6.500 INCHES MAXIMUM | | CAPACITANCE VALUE PER SECTION | 1.000 MICROFARADS SINGLE SECTION | | CASE INSULATION MATERIAL | PAPER OR PLASTIC | | CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH | 8.760 INCHES NOMINAL | | MOUNTING FACILITY SCREW THREAD SERIES DESIGNATOR | UNC | | MOUNTING FACILITY TYPE AND QUANTITY | 2 THREADED MOUNTING STUDS | | NOMINAL THREAD SIZE | 1.375 INCHES | | NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | 60000.0 DC SINGLE SECTION | | NONDERATED OPERATING TEMP | 0.0 CELSIUS MINIMUM AND 60.0 CELSIUS MAXIMUM | | RELIABILITY INDICATOR | NOT ESTABLISHED | | SCHEMATIC DIAGRAM DESIGNATOR | NO COMMON OR GROUNDED ELECTRODE(S) | | TERMINAL LENGTH | 5.290 INCHES NOMINAL | | TERMINAL DIAMETER | 1.375 INCHES NOMINAL | | TERMINAL TYPE AND QUANTITY | 2 THREADED STUD | | TERMINAL SURFACE TREATMENT | SOLDER | | TOLERANCE RANGE PER SECTION | -10.00 TO 10.00 PERCENT SINGLE SECTION |
|
|