|
|
|
National Stock Number:
5910-01-141-5536
Federal Supply Class:
5910
National Item Identification Number:
011415536
Description:
CAPACITOR,FIXED,PLASTIC DIELECTR
Detail:
A capacitor whose capacitance value cannot be adjusted or varied, having a plastic, plastic film, plasticized (plastic impregnated) paper, or any combination of plastic and paper or plastic and paper films as the dielectric material. The plastic may be one or more types of synthetic compounds such as polyesters, polyfluorides, polycabonates, and the like. It may be a single unit, or consist of two or more fixed units which cannot be separated. For items whose electrodes consist of a metallic film deposited (metallized) on the dielectric material, see CAPACITOR, FIXED, METALLIZED, PAPER-PLASTIC DIELECTRIC.
|
Manufacturer Information:
| 151000-1 | 24930 | L3HARRIS TECHNOLOGIES, INC | | 2E503-204A | 58364 | BYCAP INC | | 50F651S | 10026 | CSI TECHNOLOGIES, INC. |
|
Techincal Specification:
| BODY HEIGHT | 4.000 INCHES NOMINAL | | BODY LENGTH | 10.120 INCHES NOMINAL | | BODY STYLE | W/MTG TABS/FLANGES TERMINALS ON OPPOSITE SURFACES | | BODY WIDTH | 8.000 INCHES NOMINAL | | CAPACITANCE VALUE PER SECTION | 0.200 MICROFARADS SINGLE SECTION | | DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT | 1.000 | | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | 7.000 INCHES NOMINAL | | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH | 10.875 INCHES NOMINAL | | INSULATION RESISTANCE AT REFERENCE TEMP | 50000.0 MEGOHMS | | MOUNTING FACILITY TYPE AND QUANTITY | 6 UNTHREADED MOUNTING HOLES | | NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | 50000.0 DC SINGLE SECTION | | NONDERATED OPERATING TEMP | -54.0 CELSIUS MINIMUM AND 85.0 CELSIUS MAXIMUM | | RELIABILITY INDICATOR | NOT ESTABLISHED | | SCHEMATIC DIAGRAM DESIGNATOR | NO COMMON OR GROUNDED ELECTRODES, W/SEPARATE CASE TERMINAL | | TERMINAL DIAMETER | 0.190 INCHES NOMINAL | | TERMINAL TYPE AND QUANTITY | 1 CONNECTOR, RECEPTACLE AND 1 STANDOFF, THREADED STUD AND 1 THREADED STUD | | TOLERANCE RANGE PER SECTION | -10.00 TO 10.00 PERCENT SINGLE SECTION | | UNTHREADED MOUNTING HOLE DIAMETER | 0.367 INCHES MINIMUM AND 0.374 INCHES MAXIMUM |
|
|