|
|
|
National Stock Number:
5910-01-146-9051
Federal Supply Class:
5910
National Item Identification Number:
011469051
Description:
CAPACITOR,FIXED,PLASTIC DIELECTR
Detail:
A capacitor whose capacitance value cannot be adjusted or varied, having a plastic, plastic film, plasticized (plastic impregnated) paper, or any combination of plastic and paper or plastic and paper films as the dielectric material. The plastic may be one or more types of synthetic compounds such as polyesters, polyfluorides, polycabonates, and the like. It may be a single unit, or consist of two or more fixed units which cannot be separated. For items whose electrodes consist of a metallic film deposited (metallized) on the dielectric material, see CAPACITOR, FIXED, METALLIZED, PAPER-PLASTIC DIELECTRIC.
|
Manufacturer Information:
| FPCB223-H | 27735 | SOUTHERN ELECTRONICS CO INC | | PC2X-.02-100-2 | 27735 | SOUTHERN ELECTRONICS CO INC | | SM-A-595779-203 | 80063 | US ARMY COMMUNICATIONS & ELECTRONICS MATERIEL READINESS COMMAND LOGISTICS ENGINEERING DIR | | SY15-2232100 | 84411 | AMERICAN SHIZUKI CORP |
|
Techincal Specification:
| BODY HEIGHT | 0.300 INCHES MAXIMUM | | BODY LENGTH | 0.562 INCHES MAXIMUM | | BODY WIDTH | 0.160 INCHES MAXIMUM | | BODY STYLE | W/O MTG FACILITIES, TERMINALS ON OPPOSITE SURFACES | | CAPACITANCE VALUE PER SECTION | 0.022 MICROFARADS SINGLE SECTION | | DIELECTRIC MATERIAL | PLASTIC POLYCARBONATE | | INSULATION RESISTANCE AT MAXIMUM OPERATING TEMP | 30.0 MEGOHM-MICROFARADS | | INSULATION RESISTANCE AT REFERENCE TEMP | 10000.0 MEGOHM-MICROFARADS | | MATERIAL | PLASTIC CASE | | NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | 50.0 DC SINGLE SECTION | | NONDERATED OPERATING TEMP | -65.0 CELSIUS MINIMUM AND 125.0 CELSIUS MAXIMUM | | RELIABILITY INDICATOR | NOT ESTABLISHED | | SCHEMATIC DIAGRAM DESIGNATOR | NO COMMON OR GROUNDED ELECTRODE(S) | | TERMINAL LENGTH | 1.875 INCHES NOMINAL | | TERMINAL DIAMETER | 0.025 INCHES NOMINAL | | TERMINAL SURFACE TREATMENT | SOLDER | | TERMINAL TYPE AND QUANTITY | 2 UNINSULATED WIRE LEAD | | TOLERANCE RANGE PER SECTION | -2.00 TO 2.00 PERCENT SINGLE SECTION |
|
|