|
|
|
National Stock Number:
5910-01-258-3461
Federal Supply Class:
5910
National Item Identification Number:
012583461
Description:
CAPACITOR,FIXED,PLASTIC DIELECTR
Detail:
A capacitor whose capacitance value cannot be adjusted or varied, having a plastic, plastic film, plasticized (plastic impregnated) paper, or any combination of plastic and paper or plastic and paper films as the dielectric material. The plastic may be one or more types of synthetic compounds such as polyesters, polyfluorides, polycabonates, and the like. It may be a single unit, or consist of two or more fixed units which cannot be separated. For items whose electrodes consist of a metallic film deposited (metallized) on the dielectric material, see CAPACITOR, FIXED, METALLIZED, PAPER-PLASTIC DIELECTRIC.
|
Manufacturer Information:
| K93E122FSW | 12517 | COMPONENT RESEARCH CO INC |
|
Techincal Specification:
| DIELECTRIC MATERIAL | PLASTIC POLYSTYRENE | | DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT | 0.020 | | BODY DIAMETER | 0.312 INCHES NOMINAL | | BODY LENGTH | 0.687 INCHES NOMINAL | | BODY STYLE | W/O MTG FACILITIES, AXIAL TERMINALS | | CAPACITANCE VALUE PER SECTION | 0.0012 MICROFARADS SINGLE SECTION | | CASE INSULATION MATERIAL | PLASTIC | | CASE MATERIAL | METAL | | FEATURES PROVIDED | HERMETICALLY SEALED CASE | | NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | 400.0 DC SINGLE SECTION | | NONDERATED OPERATING TEMP | -65.0 DEG CELSIUS MINIMUM AND 85.0 DEG CELSIUS MAXIMUM | | INSULATION RESISTANCE AT REFERENCE TEMP | 1000000.0 MEGOHMS | | INTERNAL ELECTRICAL CONNECTION TYPE | EXTENDED FOIL | | RELIABILITY INDICATOR | NOT ESTABLISHED | | SCHEMATIC DIAGRAM DESIGNATOR | ELECTRODE(S) GROUNDED TO CASE, W/GND TERMINAL | | TOLERANCE OF TEMP COEFFICIENT PER SECTION IN PPM PER DEG CELSIUS | -50.0/+50.0 SINGLE SECTION | | TOLERANCE RANGE PER SECTION | -1.00/+1.00 PERCENT SINGLE SECTION | | TEMP COEFFICIENT OF CAPACITANCE PER SECTION IN PPM PER DEG CELSIUS | -80.0 SINGLE SECTION | | TERMINAL DIAMETER | 0.025 INCHES NOMINAL | | TERMINAL LENGTH | 1.625 INCHES MINIMUM | | TERMINAL TYPE AND QUANTITY | 2 UNINSULATED WIRE LEAD | | TERMINAL SURFACE TREATMENT | SOLDER |
|
|