| TERMINAL TYPE AND QUANTITY | 2 UNINSULATED WIRE LEAD |
| BODY STYLE | W/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE |
| RELIABILITY FAILURE RATE LEVEL IN PERCENT | 0.010 |
| DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT | 0.150 |
| TERMINAL DIAMETER | 0.024 INCHES MINIMUM AND 0.029 INCHES MAXIMUM |
| TEMP COEFFICIENT OF CAPACITANCE PER SECTION IN PPM PER DEG CELSIUS | 0.0 SINGLE SECTION |
| RELIABILITY INDICATOR | ESTABLISHED |
| CAPACITANCE VALUE PER SECTION | 27.000 PICOFARADS SINGLE SECTION |
| TOLERANCE OF TEMP COEFFICIENT PER SECTION IN PPM PER DEG CELSIUS | -30.0/+30.0 SINGLE SECTION |
| INSULATION RESISTANCE AT REFERENCE TEMP | 100000.0 MEGOHMS |
| TEST DATA DOCUMENT | 81349-MIL-C-20 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| BODY WIDTH | 0.160 INCHES MINIMUM AND 0.200 INCHES MAXIMUM |
| TOLERANCE RANGE PER SECTION | -2.00/+2.00 PERCENT SINGLE SECTION |
| SCHEMATIC DIAGRAM DESIGNATOR | NO COMMON OR GROUNDED ELECTRODE(S) |
| CASE MATERIAL | PLASTIC |
| BODY HEIGHT | 0.065 INCHES MINIMUM AND 0.115 INCHES MAXIMUM |
| CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH | 0.185 INCHES MINIMUM AND 0.215 INCHES MAXIMUM |
| SPECIFICATION/STANDARD DATA | 81349-MIL-C-20/39 GOVERNMENT SPECIFICATION |
| TERMINAL LENGTH | 1.250 INCHES MINIMUM |
| TERMINAL SURFACE TREATMENT | SOLDER |
| NONDERATED OPERATING TEMP | -55.0 DEG CELSIUS MINIMUM AND 125.0 DEG CELSIUS MAXIMUM |
| NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | 200.0 DC SINGLE SECTION |
| INSULATION RESISTANCE AT MAXIMUM OPERATING TEMP | 1000.0 MEGOHMS |
| BODY LENGTH | 0.160 INCHES MINIMUM AND 0.200 INCHES MAXIMUM |