| UNTHREADED MOUNTING HOLE DIAMETER | 0.169 INCHES MINIMUM AND 0.174 INCHES MAXIMUM |
| TEMP COEFFICIENT OF CAPACITANCE RANGE PER SECTION IN PPM PER DEG CELSIUS | -3.0 TO 5.0 SINGLE SECTION |
| TERMINAL DIAMETER | 0.025 INCHES NOMINAL |
| TERMINAL LENGTH | 12.000 INCHES MINIMUM |
| TERMINAL SURFACE TREATMENT | SOLDER |
| TERMINAL TYPE AND QUANTITY | 2 UNINSULATED WIRE LEAD |
| DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT | 0.500 |
| BODY HEIGHT | 3.280 INCHES MAXIMUM |
| BODY LENGTH | 3.780 INCHES MAXIMUM |
| BODY STYLE | W/THD MTG HOLE(S)/STUD(S) TERMINAL(S) ON ONE SURFACE |
| BODY WIDTH | 0.900 INCHES MAXIMUM |
| CAPACITANCE VALUE PER SECTION | 0.00051 MICROFARADS SINGLE SECTION |
| CASE MATERIAL | PLASTIC |
| CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH | 2.000 INCHES NOMINAL |
| INSULATION RESISTANCE AT REFERENCE TEMP | 45000.0 MEGOHMS |
| NONDERATED OPERATING TEMP | 0.0 DEG CELSIUS MINIMUM AND 70.0 DEG CELSIUS MAXIMUM |
| NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | 25000.0 DC SINGLE SECTION |
| MOUNTING FACILITY TYPE AND QUANTITY | 4 UNTHREADED MOUNTING HOLES |
| SCHEMATIC DIAGRAM DESIGNATOR | NO COMMON OR GROUNDED ELECTRODE(S) |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| TOLERANCE RANGE PER SECTION | -10.00 TO 10.00 PERCENT SINGLE SECTION |