| ADJUSTMENT DEVICE DRIVE TYPE AND QUANTITY | 1 SQUARE HOLE |
| ADJUSTMENT DEVICE TORQUE | 0.050 INCH-OUNCES MINIMUM AND 1.000 INCH-OUNCES MAXIMUM |
| BODY DIAMETER | 0.170 INCHES MINIMUM AND 0.190 INCHES MAXIMUM |
| BODY HEIGHT | 0.070 INCHES MINIMUM AND 0.100 INCHES MAXIMUM |
| BODY STYLE | ROTARY |
| CAPACITANCE RANGE IN PICOFARADS | +2.5 TO 10.0 SINGLE SECTION |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO DIAMETER | 0.140 INCHES NOMINAL |
| CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO DIAMETER | 0.140 INCHES NOMINAL |
| DISSIPATION FACTOR AT 25 DEG CELSIUS IN PERCENT | 0.2 |
| INCLOSURE TYPE | ENCASED |
| INSULATION DC RESISTANCE AT 25 DEG CELSIUS | 10000.0 MEGOHMS |
| MOUNTING FACILITY TYPE AND QUANTITY | 2 TERMINAL |
| NONDERATED VOLTAGE RATING AND TYPE | 250.0 DC CONTINUOUS SINGLE SECTION |
| NONDERATED OPERATING TEMP | -55.0 CELSIUS MINIMUM AND 125.0 CELSIUS MAXIMUM |
| QUALITY FACTOR AT 25 DEG CELSIUS | 1000.0 |
| SPECIFICATION/STANDARD DATA | 81349-MIL-C-81/9B GOVERNMENT SPECIFICATION |
| TEMP COEFFICIENT OF CAPACITANCE IN PPM PER DEG CELSIUS | 100.0 SINGLE SECTION |
| TERMINAL LOCATION | END OPPOSITE ADJUSTMENT CONTROL PERPENDICULAR |
| TERMINAL LENGTH | 0.070 INCHES MINIMUM AND 0.100 INCHES MAXIMUM |
| TERMINAL THICKNESS | 0.003 INCHES MINIMUM AND 0.005 INCHES MAXIMUM |
| TERMINAL TYPE AND QUANTITY | 2 PRINTED CIRCUIT |
| TEST DATA DOCUMENT | 81349-MIL-C-81 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| TOLERANCE OF TEMP COEFFICIENT IN PPM PER DEG CELSIUS | -600.0 TO 600.0 SINGLE SECTION |