| ADJUSTMENT DEVICE DRIVE TYPE AND QUANTITY | 1 SLOTTED SCREW |
| BODY LENGTH | 8.1 MILLIMETERS NOMINAL |
| BODY STYLE | PISTON |
| CAPACITANCE RANGE IN PICOFARADS | +1.2 TO 16.0 SINGLE SECTION |
| CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO DIAMETER | 4.7 MILLIMETERS MINIMUM AND 5.3 MILLIMETERS MAXIMUM |
| INCLOSURE TYPE | ENCASED |
| INSULATION DC RESISTANCE AT 25 DEG CELSIUS | 1000000.0 MEGOHMS |
| OVERALL DIAMETER | 6.9 MILLIMETERS MINIMUM AND 7.5 MILLIMETERS MAXIMUM |
| OVERALL LENGTH | 15.8 MILLIMETERS MINIMUM AND 16.4 MILLIMETERS MAXIMUM |
| MATERIAL | CERAMIC BASE |
| MOUNTING FACILITY TYPE AND QUANTITY | 2 TERMINAL |
| NONDERATED VOLTAGE RATING AND TYPE | 250.0 DC CONTINUOUS SINGLE SECTION |
| NONDERATED OPERATING TEMP | -65.0 CELSIUS MINIMUM AND 125.0 CELSIUS MAXIMUM |
| PRECIOUS MATERIAL AND LOCATION | ROTOR AND STATOR SURFACES GOLD |
| PRECIOUS MATERIAL | GOLD |
| QUALITY FACTOR AT 25 DEG CELSIUS | 5000.0 |
| TEMP COEFFICIENT OF CAPACITANCE IN PPM PER DEG CELSIUS | 65.0 SINGLE SECTION |
| TERMINAL DIAMETER | 0.1 MILLIMETERS NOMINAL |
| TERMINAL LENGTH | 8.1 MILLIMETERS NOMINAL |
| TERMINAL LOCATION | CIRCUMFERENCE ON ADJUSTMENT CONTROL END BENT BACKWARD |
| TERMINAL THICKNESS | 0.4 MILLIMETERS NOMINAL |
| TERMINAL TYPE AND QUANTITY | 1 PRINTED CIRCUIT AND 1 SOLDER STUD |
| TOLERANCE OF TEMP COEFFICIENT IN PPM PER DEG CELSIUS | -30.0 TO 30.0 SINGLE SECTION |
| TUNING CHARACTERISTIC | STRAIGHT LINE CAPACITY SINGLE SECTION |