| ELECTRICAL POLARIZATION | POLARIZED |
| ANODE TYPE | PLAIN FOIL |
| BODY DIAMETER | 0.985 INCHES MINIMUM AND 1.015 INCHES MAXIMUM |
| BODY LENGTH | 2.125 INCHES MINIMUM AND 2.328 INCHES MAXIMUM |
| BODY STYLE | W/O MTG FACILITIES, AXIAL TERMINALS |
| CAPACITANCE VALUE PER SECTION | 1000.000 MICROFARADS SINGLE SECTION |
| CAPACITIVE ELECTRODE MATERIAL | ALUMINUM |
| CASE INSULATION MATERIAL | PLASTIC |
| DC LEAKAGE AT MAXIMUM OPERATING TEMP | 670.0 MICROAMPERES |
| DC LEAKAGE AT REFERENCE TEMP | 111.000 MICROAMPERES |
| EQUIVALENT SERIES RESISTANCE AT REFERENCE TEMP IN OHMS | 0.13 |
| IMPEDANCE AT MINIMUM OPERATING TEMP IN OHMS | 2.7 |
| NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | 50.0 DC SINGLE SECTION |
| NONDERATED OPERATING TEMP | -55.0 CELSIUS MINIMUM AND 105.0 CELSIUS MAXIMUM |
| RELIABILITY FAILURE RATE LEVEL IN PERCENT | 0.100 |
| RELIABILITY INDICATOR | ESTABLISHED |
| SCHEMATIC DIAGRAM DESIGNATOR | ELECTRODE(S) GROUNDED TO CASE, W/GND TERMINAL |
| SPECIFICATION/STANDARD DATA | 81349-MIL-C-39018/3 GOVERNMENT SPECIFICATION |
| TERMINAL DIAMETER | 0.038 INCHES MINIMUM AND 0.048 INCHES MAXIMUM |
| TERMINAL LENGTH | 2.250 INCHES MINIMUM AND 2.750 INCHES MAXIMUM |
| TERMINAL SURFACE TREATMENT | SOLDER |
| TERMINAL TYPE AND QUANTITY | 2 UNINSULATED WIRE LEAD |
| TEST DATA DOCUMENT | 81349-MIL-C-39018 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| TOLERANCE RANGE PER SECTION | -10.00 TO 30.00 PERCENT SINGLE SECTION |