| REFERENCE FREQUENCY PER FUNCTION | 400.0 HERTZ BLANK |
| INSERTION LOSS AT REFERENCE FREQUENCY PER FUNCTION IN DECIBELS | 3.0 BLANK |
| INCLOSURE TYPE | ENCASED |
| FREQUENCY BAND WIDTH PER FUNCTION | 380.00 HERTZ BLANK AND |
| 420.00 HERTZ BLANK |
| FUNCTIONAL TERMINAL TYPE AND QUANTITY | 1 SOLDER STUD INPUT 1ST FUNCTION |
| 1 SOLDER STUD OUTPUT 2ND FUNCTION |
| 1 SOLDER STUD GROUND 3RD FUNCTION |
| STYLE DESIGNATOR | RECTANGULAR TERMINAL/TERMINALS ON ONE SURFACE |
| INPUT IMPEDANCE PER FUNCTION W/LOAD | 100.0 KILOHMS BLANK |
| OUTPUT IMPEDANCE PER FUNCTION W/SOURCE ACROSS INPUT | 100.0 KILOHMS BLANK |
| OVERALL HEIGHT | 2.440 INCHES NOMINAL |
| BODY LENGTH | 1.500 INCHES NOMINAL |
| BODY HEIGHT | 2.250 INCHES NOMINAL |
| BODY WIDTH | 1.500 INCHES NOMINAL |
| MOUNTING FACILITY TYPE AND QUANTITY | 4 THREADED STUD |
| DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH | 1.000 INCHES NOMINAL |
| DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | 1.000 INCHES NOMINAL |
| MOUNTING FACILITY SCREW THREAD SERIES DESIGNATOR | UNC |
| NOMINAL THREAD SIZE | 0.112 INCHES |
| TEST DATA DOCUMENT | 97942-579R629H11 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| SPECIFIED FREQUENCIES OF DISCRIMINATION PER FUNCTION | 300.00 HERTZ BLANK AND |
| 380.00 HERTZ BLANK AND |
| 420.00 HERTZ BLANK AND |
| 550.00 HERTZ BLANK |
| DISCRIMINATION AT SPECIFIED FREQUENCIES PER FUNCTION IN DECIBELS | 28.0 MINIMUM BLANK AND |
| 3.0 MAXIMUM BLANK AND |
| 26.0 MINIMUM BLANK 1ST FUNCTION |
| PRINCIPAL CIRCUITRY TYPE PER FUNCTION | INDUCTANCE-CAPACITANCE BLANK |
| OPERATING TEMP RANGE | -20.0 TO 80.0 DEG CELSIUS |
| BODY MATERIAL | PLASTIC |
| THE MANUFACTURERS DATA | |
| MANUFACTURERS CODE | 97942 |
| DESIGN CONTROL REFERENCE | 579R629H11 |