| ELECTRICAL RESISTANCE PER FUNCTION | 1.5 MEGOHMS RESISTOR R1 AND 1.5 MEGOHMS RESISTOR R2 AND 1.0 MEGOHMS RESISTOR R3 |
| ASSEMBLY FORM | ENCASED |
| CAPACITANCE TOLERANCE PER FUNCTION IN PERCENT | -10.0 TO 10.0 CAPACITOR C1 |
| CAPACITANCE VALUE PER FUNCTION | 10000.0 PICOFARADS CAPACITOR C1 |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 1.109 INCHES MINIMUM AND 1.141 INCHES MAXIMUM |
| DC VOLTAGE RATING PER FUNCTION IN VOLTS | 300.0 CAPACITOR C1 |
| OVERALL HEIGHT | 4.422 INCHES NOMINAL |
| OVERALL LENGTH | 1.688 INCHES MINIMUM AND 1.750 INCHES MAXIMUM |
| OVERALL WIDTH | 1.188 INCHES MINIMUM AND 1.250 INCHES MAXIMUM |
| MATERIAL | COPPER ALLOY CASE |
| MOUNTING FACILITY THREAD SIZE AND SERIES/TYPE DESIGNATOR | 0.164-32 UNC |
| MOUNTING FACILITY QUANTITY | 2 |
| MOUNTING METHOD | THREADED STUD |
| RESISTANCE TOLERANCE PER FUNCTION IN PERCENT | -2.2 TO 0.4 RESISTOR R1 AND -2.2 TO 0.4 RESISTOR R2 AND -2.3 TO 0.5 RESISTOR R3 |
| RESISTOR POWER DISSIPATION RATING PER FUNCTION IN WATTS | 2.000 ALL RESISTORS |
| SCHEMATIC DIAGRAM DESIGNATOR | 1 CAPACITOR, 3 RESISTORS |
| SURFACE TREATMENT | TIN CASE |
| TERMINAL TYPE AND QUANTITY | 4 SOLDER STUD |
| TEST DATA DOCUMENT | 18876-8007245 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |