| REFERENCE FREQUENCY PER FUNCTION | 1.105 KILOHERTZ BLANK |
| INSERTION LOSS AT REFERENCE FREQUENCY PER FUNCTION IN DECIBELS | 6.0 BLANK |
| INCLOSURE TYPE | HERMETICALLY SEALED |
| FREQUENCY BAND WIDTH PER FUNCTION | 1.03 KILOHERTZ BLANK AND |
| 1.18 KILOHERTZ BLANK |
| FUNCTIONAL TERMINAL TYPE AND QUANTITY | 1 TAB, SOLDER LUG INPUT 1ST FUNCTION |
| 1 TAB, SOLDER LUG OUTPUT 2ND FUNCTION |
| 1 TAB, SOLDER LUG GROUND 3RD FUNCTION |
| STYLE DESIGNATOR | ROUND TERMINAL/TERMINALS ON OPPOSITE SURFACES |
| SOURCE IMPEDANCE RATING PER FUNCTION | 600.0 OHMS BLANK |
| LOAD IMPEDANCE PER FUNCTION | 600.0 OHMS BLANK |
| OVERALL LENGTH | 2.562 INCHES NOMINAL |
| OVERALL HEIGHT | 3.703 INCHES NOMINAL |
| OVERALL WIDTH | 2.562 INCHES NOMINAL |
| BODY HEIGHT | 3.234 INCHES MINIMUM AND |
| 3.375 INCHES MAXIMUM |
| BODY OUTSIDE DIAMETER | 2.562 INCHES NOMINAL |
| DISTANCE BETWEEN MOUNTING SURFACE AND LOWER END | 0.453 INCHES NOMINAL |
| MOUNTING FACILITY TYPE AND QUANTITY | 4 UNTHREADED HOLE |
| UNTHREADED MOUNTING HOLE DIAMETER | 0.177 INCHES NOMINAL |
| DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH | 2.094 INCHES NOMINAL |
| SPECIFIED FREQUENCIES OF DISCRIMINATION PER FUNCTION | 935.00 HERTZ BLANK AND |
| 1.03 KILOHERTZ BLANK AND |
| 1.18 KILOHERTZ BLANK AND |
| 1.275 KILOHERTZ BLANK |
| DISCRIMINATION AT SPECIFIED FREQUENCIES PER FUNCTION IN DECIBELS | 24.0 MINIMUM BLANK AND |
| 6.0 NOMINAL BLANK 1ST FUNCTION |