5915-00-503-2133, FILTER,RADIO FREQUENCY INTERFERE

5915-00-503-2128 FILTER,RADIO FREQUENCY INTERFERE

5915-00-503-2134 FILTER,RADIO FREQUENCY INTERFERE

National Stock Number:
5915-00-503-2133

Federal Supply Class:
5915

National Item Identification Number:
005032133

Description:
FILTER,RADIO FREQUENCY INTERFERE

Detail:
An item designed to suppress undesired (interfering) frequencies and have a minimal effect on the desired frequencies when inserted in an electrical power circuit. Excludes items which consist of a single capacitor, inductor, resistor, or devices consisting of only two or more circuit elements of the same basic name. Excludes FILTER, LOW PASS and SUPPRESSOR, IGNITION INTERFERENCE. For items designed to be inserted in a line which is primarily intended to carry high frequency waves modulated with signals, such as antenna lead-in, see FILTER, BAND SUPPRESSION and FILTER, BAND PASS. See also LIMITER, ELECTRICAL NOISE.

Manufacturer Information:

1540	21966	TDL, INC
5003-3016	13050	SPECTRUM CONTROL, INC. DIV API TECHNOLOGIES - EIS/WESSON
7707274P1	03538	LOCKHEED MARTIN CORPORATION
68D40003	97151	AIR FORCE LIFECYCLE MANAGEMENT CENTER ELECTRONIC COMPONENTS (AFLCMC/EZSS)
7707274P1	99971	LOCKHEED MARTIN CORP NAVAL ELECTRONICS & SURVEILLANCE SYSTEMS

Techincal Specification:

OPERATING CURRENT RATING PER FUNCTION IN AMPS	10.0 1ST RADIO INTERFERENCE 1ST FUNCTION
	2.0 2ND RADIO INTERFERENCE 2ND FUNCTION
	12.0 3RD RADIO INTERFERENCE 3RD FUNCTION
	12.0 4TH RADIO INTERFERENCE 4TH FUNCTION
	0.5 5TH RADIO INTERFERENCE 5TH FUNCTION
	0.5 6TH RADIO INTERFERENCE 6TH FUNCTION
INCLOSURE TYPE	ENCASED
FUNCTIONAL TERMINAL TYPE AND QUANTITY	2 CONNECTOR, RECEPTACLE INPUT AND
	1 CONNECTOR, PLUG INPUT 1ST FUNCTION
	11 THREADED STUD OUTPUT 2ND FUNCTION
MOUNTING FACILITY TYPE AND QUANTITY	20 UNTHREADED HOLE
STYLE DESIGNATOR	RECTANGULAR TERMINAL/TERMINALS ON ADJACENT SURFACES
SOURCE IMPEDANCE RATING PER FUNCTION	50.0 OHMS 1ST RADIO INTERFERENCE 1ST FUNCTION
	50.0 OHMS 2ND RADIO INTERFERENCE 2ND FUNCTION
	50.0 OHMS 3RD RADIO INTERFERENCE 3RD FUNCTION
	50.0 OHMS 4TH RADIO INTERFERENCE 4TH FUNCTION
	50.0 OHMS 5TH RADIO INTERFERENCE 5TH FUNCTION
	50.0 OHMS 6TH RADIO INTERFERENCE 6TH FUNCTION
LOAD IMPEDANCE PER FUNCTION	50.0 OHMS 1ST RADIO INTERFERENCE 1ST FUNCTION
	50.0 OHMS 2ND RADIO INTERFERENCE 2ND FUNCTION
	50.0 OHMS 3RD RADIO INTERFERENCE 3RD FUNCTION
	50.0 OHMS 4TH RADIO INTERFERENCE 4TH FUNCTION
	50.0 OHMS 5TH RADIO INTERFERENCE 5TH FUNCTION
	50.0 OHMS 6TH RADIO INTERFERENCE 6TH FUNCTION
OPERATING VOLTAGE RATING AND TYPE PER FUNCTION	115.0 VOLTS AC 1ST RADIO INTERFERENCE 1ST FUNCTION
	28.0 VOLTS DC 2ND RADIO INTERFERENCE 2ND FUNCTION
	115.0 VOLTS AC 3RD RADIO INTERFERENCE 3RD FUNCTION
	115.0 VOLTS AC 4TH RADIO INTERFERENCE 4TH FUNCTION
	28.0 VOLTS DC 5TH RADIO INTERFERENCE 5TH FUNCTION
	28.0 VOLTS DC 6TH RADIO INTERFERENCE 6TH FUNCTION
POWER LINE FREQUENCY RATING PER FUNCTION IN HERTZ	1000.0 1ST RADIO INTERFERENCE 1ST FUNCTION
	1000.0 2ND RADIO INTERFERENCE 2ND FUNCTION
	1000.0 3RD RADIO INTERFERENCE 3RD FUNCTION
MAXIMUM VOLTAGE DROP PER FUNCTION	100.0 MILLIVOLTS AC 1ST RADIO INTERFERENCE 1ST FUNCTION
	100.0 MILLIVOLTS DC 2ND RADIO INTERFERENCE 2ND FUNCTION
	100.0 MILLIVOLTS AC 3RD RADIO INTERFERENCE 3RD FUNCTION
	100.0 MILLIVOLTS AC 4TH RADIO INTERFERENCE 4TH FUNCTION
	100.0 MILLIVOLTS DC 5TH RADIO INTERFERENCE 5TH FUNCTION
	100.0 MILLIVOLTS DC 6TH RADIO INTERFERENCE 6TH FUNCTION
OVERALL LENGTH	7.480 INCHES MINIMUM AND
	7.520 INCHES MAXIMUM
OVERALL HEIGHT	4.310 INCHES NOMINAL
OVERALL WIDTH	3.540 INCHES MINIMUM AND
	3.580 INCHES MAXIMUM
BODY LENGTH	6.360 INCHES MINIMUM AND
	6.400 INCHES MAXIMUM
BODY WIDTH	2.420 INCHES MINIMUM AND
	2.460 INCHES MAXIMUM
UNTHREADED MOUNTING HOLE DIAMETER	0.196 INCHES NOMINAL
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH	7.115 INCHES MINIMUM AND
	7.135 INCHES MAXIMUM
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH	3.187 INCHES NOMINAL
SPECIAL FEATURES	11 FUNCTIONS
TEST DATA DOCUMENT	97151-68D40003 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING)
AVERAGE LIFE RATING IN HOURS	1000.0
INPUT TERMINAL MANUFACTURER CODE	96906
OPERATING TEMP RANGE	-55.0 TO 85.0 DEG CELSIUS
BODY MATERIAL	METAL

Click here to Register for Free 30-day Trial