|
|
|
National Stock Number:
5915-00-503-3704
Federal Supply Class:
5915
National Item Identification Number:
005033704
Description:
FILTER,RADIO FREQUENCY INTERFERE
Detail:
An item designed to suppress undesired (interfering) frequencies and have a minimal effect on the desired frequencies when inserted in an electrical power circuit. Excludes items which consist of a single capacitor, inductor, resistor, or devices consisting of only two or more circuit elements of the same basic name. Excludes FILTER, LOW PASS and SUPPRESSOR, IGNITION INTERFERENCE. For items designed to be inserted in a line which is primarily intended to carry high frequency waves modulated with signals, such as antenna lead-in, see FILTER, BAND SUPPRESSION and FILTER, BAND PASS. See also LIMITER, ELECTRICAL NOISE.
|
Manufacturer Information:
| 372B27550 | 15280 | NORTHROP GRUMMAN SYSTEMS CORPORATION DIV ES DEFENSIVE SYSTEMS DIVISION | | 372B27550 | 26916 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | JN17-1162A | 13619 | EMS DEVELOPMENT CORPORATION | | JN17-1162A1 | 13619 | EMS DEVELOPMENT CORPORATION | | 64855 | 56289 | SPRAGUE ELECTRIC CO WORLD HQS | | JN17-1162A | 56289 | SPRAGUE ELECTRIC CO WORLD HQS | | JN17-1162A1 | 56289 | SPRAGUE ELECTRIC CO WORLD HQS |
|
Techincal Specification:
| OPERATING CURRENT RATING PER FUNCTION IN AMPS | 1.0 BLANK | | INCLOSURE TYPE | ENCASED | | FUNCTIONAL TERMINAL TYPE AND QUANTITY | 1 TAB, SOLDER LUG INPUT 1ST FUNCTION | | 1 WIRE LEAD OUTPUT 2ND FUNCTION | | MOUNTING FACILITY TYPE AND QUANTITY | 2 UNTHREADED HOLE | | STYLE DESIGNATOR | RECTANGULAR TERMINAL/TERMINALS ON OPPOSITE SURFACES | | SOURCE IMPEDANCE RATING PER FUNCTION | 50.0 OHMS BLANK | | LOAD IMPEDANCE PER FUNCTION | 50.0 OHMS BLANK | | OPERATING VOLTAGE RATING AND TYPE PER FUNCTION | 300.0 VOLTS DC BLANK | | OVERALL LENGTH | 32.135 INCHES NOMINAL | | BODY LENGTH | 1.750 INCHES MINIMUM | | BODY HEIGHT | 1.000 INCHES MINIMUM | | BODY WIDTH | 1.750 INCHES MINIMUM | | UNTHREADED MOUNTING HOLE DIAMETER | 0.187 INCHES MINIMUM | | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH | 2.109 INCHES MINIMUM AND | | 2.141 INCHES MAXIMUM | | PRINCIPAL CIRCUITRY TYPE PER FUNCTION | INDUCTANCE-CAPACITANCE BLANK | | BODY MATERIAL | METAL |
|
|