| REFERENCE FREQUENCY PER FUNCTION | 2.295 KILOHERTZ BLANK |
| INSERTION LOSS AT REFERENCE FREQUENCY PER FUNCTION IN DECIBELS | 11.0 BLANK |
| INCLOSURE TYPE | ENCASED |
| FREQUENCY BAND WIDTH PER FUNCTION | 2.2525 KILOHERTZ BLANK AND |
| 2.3375 KILOHERTZ BLANK |
| FUNCTIONAL TERMINAL TYPE AND QUANTITY | 1 TAB, SOLDER LUG INPUT 1ST FUNCTION |
| 1 TAB, SOLDER LUG OUTPUT 2ND FUNCTION |
| 3 TAB, SOLDER LUG GROUND 3RD FUNCTION |
| STYLE DESIGNATOR | RECTANGULAR TERMINAL/TERMINALS ON ONE SURFACE |
| SOURCE IMPEDANCE RATING PER FUNCTION | 600.0 OHMS BLANK |
| LOAD IMPEDANCE PER FUNCTION | 600.0 OHMS BLANK |
| INPUT IMPEDANCE PER FUNCTION W/LOAD | 600.0 OHMS BLANK |
| OUTPUT IMPEDANCE PER FUNCTION W/SOURCE ACROSS INPUT | 75.0 KILOHMS BLANK |
| BODY LENGTH | 6.000 INCHES NOMINAL |
| BODY HEIGHT | 3.000 INCHES NOMINAL |
| BODY WIDTH | 1.440 INCHES NOMINAL |
| MOUNTING FACILITY TYPE AND QUANTITY | 1 THREADED STUD 1ST FUNCTION |
| 1 THREADED HOLE 2ND FUNCTION |
| DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH | 5.250 INCHES NOMINAL |
| DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | 0.875 INCHES NOMINAL |
| MOUNTING FACILITY SCREW THREAD SERIES DESIGNATOR | UNC |
| NOMINAL THREAD SIZE | 0.138 INCHES |
| TEST DATA DOCUMENT | 96238-43000005 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| SPECIFIED FREQUENCIES OF DISCRIMINATION PER FUNCTION | 2.17 KILOHERTZ BLANK AND |
| 2.2525 KILOHERTZ BLANK AND |
| 2.3375 KILOHERTZ BLANK AND |
| 2.42 KILOHERTZ BLANK |
| DISCRIMINATION AT SPECIFIED FREQUENCIES PER FUNCTION IN DECIBELS | 45.0 MINIMUM BLANK AND |
| 2.5 MAXIMUM BLANK 1ST FUNCTION |
| MAXIMUM DIELECTRIC WITHSTANDING AC RMS VOLTAGE | 500.0 VOLTS AT SEA LEVEL |
| OPERATING TEMP RANGE | -0.0 TO 65.0 DEG CELSIUS |