|
|
|
National Stock Number:
5915-00-725-7251
Federal Supply Class:
5915
National Item Identification Number:
007257251
Description:
FILTER,RADIO FREQUENCY INTERFERE
Detail:
An item designed to suppress undesired (interfering) frequencies and have a minimal effect on the desired frequencies when inserted in an electrical power circuit. Excludes items which consist of a single capacitor, inductor, resistor, or devices consisting of only two or more circuit elements of the same basic name. Excludes FILTER, LOW PASS and SUPPRESSOR, IGNITION INTERFERENCE. For items designed to be inserted in a line which is primarily intended to carry high frequency waves modulated with signals, such as antenna lead-in, see FILTER, BAND SUPPRESSION and FILTER, BAND PASS. See also LIMITER, ELECTRICAL NOISE.
|
Manufacturer Information:
| 1031512-4 | 56232 | LOCKHEED MARTIN CORPORATION | | 1031512-4REVC | 56232 | LOCKHEED MARTIN CORPORATION | | FA9076-3 | 13619 | EMS DEVELOPMENT CORPORATION | | RF00675A3 | 13619 | EMS DEVELOPMENT CORPORATION | | 1847008-4 | 53711 | NAVAL SEA SYSTEMS COMMAND | | FA9076-3 | 81831 | FILTRON CO INC DIV OF RFI CORP | | RF675A3 | 13619 | EMS DEVELOPMENT CORPORATION |
|
Techincal Specification:
| BODY HEIGHT | 1.500 INCHES NOMINAL | | BODY LENGTH | 1.500 INCHES NOMINAL | | BODY WIDTH | 1.500 INCHES NOMINAL | | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | 0.125 INCHES NOMINAL | | FUNCTIONAL TERMINAL TYPE AND QUANTITY | 1 THREADED STUD INPUT 1ST FUNCTION | | FUNCTIONAL TERMINAL TYPE AND QUANTITY | 1 THREADED STUD OUTPUT 2ND FUNCTION | | INCLOSURE TYPE | HERMETICALLY SEALED | | LOAD IMPEDANCE PER FUNCTION | 50.0 OHMS BLANK | | OVERALL LENGTH | 2.876 INCHES NOMINAL | | MOUNTING FACILITY TYPE AND QUANTITY | 4 UNTHREADED HOLE | | OPERATING CURRENT RATING PER FUNCTION IN AMPS | 5.0 BLANK | | OPERATING VOLTAGE RATING AND TYPE PER FUNCTION | 1000.0 VOLTS DC BLANK | | SOURCE IMPEDANCE RATING PER FUNCTION | 50.0 OHMS BLANK | | STYLE DESIGNATOR | RECTANGULAR TERMINAL/TERMINALS ON OPPOSITE SURFACES | | UNTHREADED MOUNTING HOLE DIAMETER | 0.281 INCHES NOMINAL |
|
|