| REFERENCE FREQUENCY PER FUNCTION | 74.0 KILOHERTZ BLANK |
| INSERTION LOSS AT REFERENCE FREQUENCY PER FUNCTION IN DECIBELS | 8.0 BLANK |
| INCLOSURE TYPE | HERMETICALLY SEALED |
| FREQUENCY BAND WIDTH PER FUNCTION | 73.00 KILOHERTZ BLANK AND |
| 75.00 KILOHERTZ BLANK |
| FUNCTIONAL TERMINAL TYPE AND QUANTITY | 1 PIN INPUT 1ST FUNCTION |
| 1 PIN OUTPUT 2ND FUNCTION |
| 2 PIN GROUND 3RD FUNCTION |
| STYLE DESIGNATOR | RECTANGULAR TERMINAL/TERMINALS ON ONE SURFACE |
| INPUT IMPEDANCE PER FUNCTION W/LOAD | 600.0 OHMS BLANK |
| OUTPUT IMPEDANCE PER FUNCTION W/SOURCE ACROSS INPUT | 2.0 KILOHMS BLANK |
| OVERALL HEIGHT | 3.360 INCHES NOMINAL |
| BODY LENGTH | 4.500 INCHES NOMINAL |
| BODY HEIGHT | 3.000 INCHES NOMINAL |
| BODY WIDTH | 1.250 INCHES NOMINAL |
| MOUNTING FACILITY TYPE AND QUANTITY | 2 UNTHREADED HOLE |
| UNTHREADED MOUNTING HOLE DIAMETER | 0.160 INCHES NOMINAL |
| DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH | 3.750 INCHES NOMINAL |
| DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | 1.562 INCHES NOMINAL |
| TEST DATA DOCUMENT | 00724-08-00242-004 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| SPECIFIED FREQUENCIES OF DISCRIMINATION PER FUNCTION | 72.00 KILOHERTZ BLANK AND |
| 73.00 KILOHERTZ BLANK AND |
| 75.00 KILOHERTZ BLANK AND |
| 76.00 KILOHERTZ BLANK |
| DISCRIMINATION AT SPECIFIED FREQUENCIES PER FUNCTION IN DECIBELS | 20.0 MINIMUM BLANK AND |
| 6.0 MAXIMUM BLANK 1ST FUNCTION |
| AVERAGE LIFE RATING IN HOURS | 10000.0 |
| OPERATING TEMP RANGE | -55.0 TO 75.0 DEG CELSIUS |
| BODY MATERIAL | METAL |
| SPECIAL FEATURES | CARRIER FREQUENCY 72.0 KHZ UPPER SIDEBAND; UNPACKAGED UNIT WEIGHT: LB1.300 |
| SPEC/STD CONTROLLING DATA | |
| MANUFACTURERS CODE | 00724 |
| MFR SOURCE CONTROLLING REFERENCE | 08-00242-004 |