| BODY MATERIAL | METAL |
| BODY OUTSIDE DIAMETER | 0.320 INCHES MINIMUM AND 0.440 INCHES MAXIMUM |
| DISCRIMINATION AT SPECIFIED FREQUENCIES PER FUNCTION IN DECIBELS | 0.3 MAXIMUM BLANK AND 60.0 MINIMUM BLANK 1ST FUNCTION |
| FUNCTIONAL TERMINAL TYPE AND QUANTITY | 1 CONNECTOR, PLUG INPUT 1ST FUNCTION |
| FUNCTIONAL TERMINAL TYPE AND QUANTITY | 1 CONNECTOR, RECEPTACLE OUTPUT 2ND FUNCTION |
| FREQUENCY BAND WIDTH PER FUNCTION | 0.00 HERTZ BLANK AND 2.50 GIGAHERTZ BLANK |
| INCLOSURE TYPE | ENCASED |
| INPUT TERMINAL IDENTIFICATION | UG21B/U |
| INPUT IMPEDANCE PER FUNCTION W/LOAD | 50.0 OHMS BLANK |
| INSERTION LOSS AT REFERENCE FREQUENCY PER FUNCTION IN DECIBELS | 0.3 BLANK |
| OVERALL LENGTH | 5.530 INCHES MINIMUM AND 5.650 INCHES MAXIMUM |
| MOUNTING FACILITY TYPE AND QUANTITY | 2 TERMINAL |
| OPERATING TEMP RANGE | -0.0 TO 85.0 CELSIUS |
| OUTPUT IMPEDANCE PER FUNCTION W/SOURCE ACROSS INPUT | 50.0 OHMS BLANK |
| OUTPUT TERMINAL IDENTIFICATION | UG23B/U |
| REFERENCE FREQUENCY PER FUNCTION | 2.0 GIGAHERTZ BLANK |
| SPECIFIED FREQUENCIES OF DISCRIMINATION PER FUNCTION | 0.00 HERTZ BLANK AND 2.50 GIGAHERTZ BLANK AND 4.25 GIGAHERTZ BLANK AND 12.50 GIGAHERTZ BLANK |
| STYLE DESIGNATOR | ROUND TERMINAL/TERMINALS ON OPPOSITE SURFACES |
| TEST DATA DOCUMENT | 12217-1292032P DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |