| ELECTRICAL RESISTANCE PER FUNCTION | 5.0 MEGOHMS RESISTOR R1 AND 500.0 KILOHMS RESISTOR R2 AND 5.0 MEGOHMS RESISTOR R3 AND 5.0 MEGOHMS RESISTOR R4 |
| ASSEMBLY FORM | ENCASED |
| CAPACITANCE TOLERANCE PER FUNCTION IN PERCENT | -10.0 TO 10.0 CAPACITOR C1 |
| CAPACITANCE VALUE PER FUNCTION | 160.0 PICOFARADS CAPACITOR C1 |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 1.125 INCHES NOMINAL |
| DC VOLTAGE RATING PER FUNCTION IN VOLTS | 300.0 CAPACITOR C1 |
| OVERALL HEIGHT | 4.500 INCHES NOMINAL |
| OVERALL LENGTH | 1.720 INCHES NOMINAL |
| OVERALL WIDTH | 1.220 INCHES NOMINAL |
| MOUNTING FACILITY THREAD SIZE AND SERIES/TYPE DESIGNATOR | 0.164-32 UNC |
| MOUNTING FACILITY QUANTITY | 2 |
| MOUNTING METHOD | THREADED STUD |
| RESISTANCE TOLERANCE PER FUNCTION IN PERCENT | -2.0 TO 0.0 ALL RESISTORS |
| RESISTOR POWER DISSIPATION RATING PER FUNCTION IN WATTS | 2.000 ALL RESISTORS |
| SCHEMATIC DIAGRAM DESIGNATOR | 1 CAPACITOR, 4 RESISTORS |
| TERMINAL TYPE AND QUANTITY | 5 FEEDTHRU |
| TEST DATA DOCUMENT | 18876-9139400 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |