| BODY HEIGHT | 3.562 INCHES MINIMUM |
| BODY LENGTH | 3.562 INCHES NOMINAL |
| BODY MATERIAL | METAL |
| BODY WIDTH | 6.000 INCHES NOMINAL |
| DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH | 4.000 INCHES NOMINAL |
| DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | 4.500 INCHES NOMINAL |
| FUNCTIONAL TERMINAL TYPE AND QUANTITY | 2 THREADED STUD INPUT 1ST FUNCTION |
| FUNCTIONAL TERMINAL TYPE AND QUANTITY | 2 THREADED STUD OUTPUT 2ND FUNCTION |
| INCLOSURE TYPE | ENCASED |
| LOAD IMPEDANCE PER FUNCTION | 50.0 OHMS BLANK |
| OVERALL HEIGHT | 1.562 INCHES NOMINAL |
| OVERALL LENGTH | 4.562 INCHES NOMINAL |
| OVERALL WIDTH | 7.250 INCHES NOMINAL |
| MOUNTING FACILITY TYPE AND QUANTITY | 6 UNTHREADED HOLE |
| OPERATING CURRENT RATING PER FUNCTION IN AMPS | 25.0 BLANK |
| OPERATING VOLTAGE RATING AND TYPE PER FUNCTION | 125.0 VOLTS AC BLANK |
| POWER LINE FREQUENCY RATING PER FUNCTION IN HERTZ | 60.0 BLANK |
| PRINCIPAL CIRCUITRY TYPE PER FUNCTION | INDUCTANCE-CAPACITANCE 1ST RADIO INTERFERENCE 1ST FUNCTION |
| PRINCIPAL CIRCUITRY TYPE PER FUNCTION | INDUCTANCE-CAPACITANCE 2ND RADIO INTERFERENCE 2ND FUNCTION |
| SOURCE IMPEDANCE RATING PER FUNCTION | 50.0 OHMS BLANK |
| STYLE DESIGNATOR | RECTANGULAR TERMINAL/TERMINALS ON OPPOSITE SURFACES |
| TEST DATA DOCUMENT | 80249-690421 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| UNTHREADED MOUNTING HOLE DIAMETER | 0.193 INCHES NOMINAL |