|
|
|
National Stock Number:
5915-01-133-5911
Federal Supply Class:
5915
National Item Identification Number:
011335911
Description:
FILTER,RADIO FREQUENCY INTERFERE
Detail:
An item designed to suppress undesired (interfering) frequencies and have a minimal effect on the desired frequencies when inserted in an electrical power circuit. Excludes items which consist of a single capacitor, inductor, resistor, or devices consisting of only two or more circuit elements of the same basic name. Excludes FILTER, LOW PASS and SUPPRESSOR, IGNITION INTERFERENCE. For items designed to be inserted in a line which is primarily intended to carry high frequency waves modulated with signals, such as antenna lead-in, see FILTER, BAND SUPPRESSION and FILTER, BAND PASS. See also LIMITER, ELECTRICAL NOISE.
|
Manufacturer Information:
| 10135206 | A486G | NIMIKKEISTOKESKUS NCB FINLAND | | 8219-0075-01 | 17472 | EATON AEROSPACE LLC | | F-13142 | 0AM43 | LCR ELECTRONICS, INC | | F12922 | 0AM43 | LCR ELECTRONICS, INC | | FC2594 | 56528 | FIL-COIL INTERNATIONAL LLC | | M1792 | 59901 | MTK ELECTRONICS INC |
|
Techincal Specification:
| BODY HEIGHT | 1.562 INCHES MAXIMUM | | BODY LENGTH | 3.350 INCHES MAXIMUM | | BODY MATERIAL | METAL | | BODY SURFACE TREATMENT | TIN | | BODY WIDTH | 2.350 INCHES MAXIMUM | | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | 1.958 INCHES MAXIMUM | | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH | 2.958 INCHES MAXIMUM | | FUNCTIONAL TERMINAL TYPE AND QUANTITY | 8 WIRE HOOK OUTPUT 2ND FUNCTION | | FUNCTIONAL TERMINAL TYPE AND QUANTITY | 1 CONNECTOR, RECEPTACLE INPUT-GROUND 1ST FUNCTION | | INCLOSURE TYPE | ENCASED | | LOAD IMPEDANCE PER FUNCTION | 50.0 OHMS BLANK | | MOUNTING FACILITY TYPE AND QUANTITY | 4 UNTHREADED HOLE | | OPERATING CURRENT RATING PER FUNCTION IN AMPS | 23.0 BLANK | | OPERATING VOLTAGE RATING AND TYPE PER FUNCTION | 28.0 VOLTS DC BLANK | | SOURCE IMPEDANCE RATING PER FUNCTION | 50.0 OHMS BLANK | | STYLE DESIGNATOR | RECTANGULAR TERMINAL/TERMINALS ON OPPOSITE SURFACES | | UNTHREADED MOUNTING HOLE DIAMETER | 0.174 INCHES NOMINAL |
|
|