5915-01-160-4951, FILTER,RADIO FREQUENCY INTERFERE

National Stock Number:
5915-01-160-4951

Federal Supply Class:
5915

National Item Identification Number:
011604951

Description:
FILTER,RADIO FREQUENCY INTERFERE

Detail:
An item designed to suppress undesired (interfering) frequencies and have a minimal effect on the desired frequencies when inserted in an electrical power circuit. Excludes items which consist of a single capacitor, inductor, resistor, or devices consisting of only two or more circuit elements of the same basic name. Excludes FILTER, LOW PASS and SUPPRESSOR, IGNITION INTERFERENCE. For items designed to be inserted in a line which is primarily intended to carry high frequency waves modulated with signals, such as antenna lead-in, see FILTER, BAND SUPPRESSION and FILTER, BAND PASS. See also LIMITER, ELECTRICAL NOISE.

Manufacturer Information:

FL83FJ3MA3-0002	81349	MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
M15733/31-0002	81349	MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MIL-F-15733/31	81349	MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MIL-PRF-15733/31	81349	MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

Techincal Specification:

OPERATING CURRENT RATING PER FUNCTION IN AMPS	5.0 BLANK
INCLOSURE TYPE	HERMETICALLY SEALED
FUNCTIONAL TERMINAL TYPE AND QUANTITY	1 THREADED STUD INPUT 1ST FUNCTION
	1 THREADED STUD OUTPUT 2ND FUNCTION
MOUNTING FACILITY TYPE AND QUANTITY	1 THREADED BUSHING
STYLE DESIGNATOR	ROUND TERMINAL/TERMINALS ON OPPOSITE SURFACES
SOURCE IMPEDANCE RATING PER FUNCTION	50.0 OHMS BLANK
LOAD IMPEDANCE PER FUNCTION	50.0 OHMS BLANK
OPERATING VOLTAGE RATING AND TYPE PER FUNCTION	600.0 VOLTS DC BLANK
MAXIMUM VOLTAGE DROP PER FUNCTION	0.5 VOLTS DC BLANK
OVERALL LENGTH	6.410 INCHES MAXIMUM
BODY LENGTH	3.810 INCHES MINIMUM AND
	3.930 INCHES MAXIMUM
BODY OUTSIDE DIAMETER	1.500 INCHES MAXIMUM
MOUNTING FACILITY SCREW THREAD SERIES DESIGNATOR	UNEF
NOMINAL THREAD SIZE	0.750 INCHES
TEST DATA DOCUMENT	81349-MIL-F-15733 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
SPECIFICATION/STANDARD DATA	81349-MIL-F-15733/31 GOVERNMENT SPECIFICATION
PRINCIPAL CIRCUITRY TYPE PER FUNCTION	CAPACITANCE-INDUCTANCE BLANK
MAXIMUM TEMP RISE	25.0 DEG CELSIUS
FULL LOAD INSERTION LOSS FREQUENCIES IN MEGAHERTZ	0.15 AND
	0.3 AND
	0.6 AND
	1.0 AND
	10.0 AND
	20.0
FULL LOAD MINIMUM INSERTION LOSS AT SPECIFIED FREQUENCY IN DECIBELS	60.0 AND
	70.0 AND
	80.0
VIBRATION RESISTANCE RANGE IN HERTZ	10.0 TO 2000.0
OPERATING TEMP RANGE	-65.0 TO 85.0 DEG CELSIUS
SPEC/STD CONTROLLING DATA
MANUFACTURERS CODE	81349
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE	MIL-PRF-15733/31
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE	M15733/31-0002

Click here to Register for Free 30-day Trial