|
|
|
National Stock Number:
5915-01-313-1406
Federal Supply Class:
5915
National Item Identification Number:
013131406
Description:
FILTER,RADIO FREQUENCY INTERFERE
Detail:
An item designed to suppress undesired (interfering) frequencies and have a minimal effect on the desired frequencies when inserted in an electrical power circuit. Excludes items which consist of a single capacitor, inductor, resistor, or devices consisting of only two or more circuit elements of the same basic name. Excludes FILTER, LOW PASS and SUPPRESSOR, IGNITION INTERFERENCE. For items designed to be inserted in a line which is primarily intended to carry high frequency waves modulated with signals, such as antenna lead-in, see FILTER, BAND SUPPRESSION and FILTER, BAND PASS. See also LIMITER, ELECTRICAL NOISE.
|
Manufacturer Information:
| M15733/73-0052 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MIL-F-15733/73 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | RF00715 | 13619 | EMS DEVELOPMENT CORPORATION | | RF715 | 13619 | EMS DEVELOPMENT CORPORATION | | MIL-PRF-15733/73 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| OPERATING CURRENT RATING PER FUNCTION IN AMPS | 50.0 BLANK | | INCLOSURE TYPE | HERMETICALLY SEALED | | FUNCTIONAL TERMINAL TYPE AND QUANTITY | 1 TAB, SOLDER LUG INPUT 1ST FUNCTION | | 1 TAB, SOLDER LUG OUTPUT 2ND FUNCTION | | MOUNTING FACILITY TYPE AND QUANTITY | 1 THREADED BUSHING | | STYLE DESIGNATOR | ROUND TERMINAL/TERMINALS ON OPPOSITE SURFACES | | OPERATING VOLTAGE RATING AND TYPE PER FUNCTION | 115.0 VOLTS AC BLANK AND | | 400.0 VOLTS DC BLANK | | POWER LINE FREQUENCY RATING PER FUNCTION IN HERTZ | 400.0 BLANK | | OVERALL LENGTH | 6.240 INCHES MINIMUM AND | | 6.400 INCHES MAXIMUM | | BODY LENGTH | 3.940 INCHES MINIMUM AND | | 4.060 INCHES MAXIMUM | | BODY OUTSIDE DIAMETER | 2.270 INCHES MAXIMUM | | MOUNTING FACILITY SCREW THREAD SERIES DESIGNATOR | UNEF | | NOMINAL THREAD SIZE | 1.125 INCHES | | TEST DATA DOCUMENT | 81349-MIL-F-15733 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | SPECIFICATION/STANDARD DATA | 81349-MIL-F-15733/73 GOVERNMENT SPECIFICATION | | SPEC/STD CONTROLLING DATA | | | MANUFACTURERS CODE | 81349 | | NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | MIL-PRF-15733/73 | | DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | M15733/73-0052 |
|
|