|
|
|
National Stock Number:
5915-01-473-2455
Federal Supply Class:
5915
National Item Identification Number:
014732455
Description:
FILTER,RADIO FREQUENCY INTERFERE
Detail:
An item designed to suppress undesired (interfering) frequencies and have a minimal effect on the desired frequencies when inserted in an electrical power circuit. Excludes items which consist of a single capacitor, inductor, resistor, or devices consisting of only two or more circuit elements of the same basic name. Excludes FILTER, LOW PASS and SUPPRESSOR, IGNITION INTERFERENCE. For items designed to be inserted in a line which is primarily intended to carry high frequency waves modulated with signals, such as antenna lead-in, see FILTER, BAND SUPPRESSION and FILTER, BAND PASS. See also LIMITER, ELECTRICAL NOISE.
|
Manufacturer Information:
| 1224373-202 | 56232 | LOCKHEED MARTIN CORPORATION | | M1932 | 59901 | MTK ELECTRONICS INC | | RF15009-2 | 13619 | EMS DEVELOPMENT CORPORATION |
|
Techincal Specification:
| BODY LENGTH | 2.750 INCHES MAXIMUM | | BODY WIDTH | 2.700 INCHES MINIMUM AND 2.800 INCHES MAXIMUM | | FUNCTIONAL TERMINAL TYPE AND QUANTITY | 1 CONNECTOR, PLUG INPUT AND 1 CONNECTOR, RECEPTACLE OUTPUT | | INCLOSURE TYPE | ENCASED | | INPUT IMPEDANCE PER FUNCTION W/LOAD | 0.05 OHMS BLANK | | MOUNTING FACILITY TYPE AND QUANTITY | 2 UNTHREADED HOLE | | OPERATING CURRENT RATING PER FUNCTION IN AMPS | 0.5 BLANK | | OPERATING VOLTAGE RATING AND TYPE PER FUNCTION | 20.0 VOLTS DC BLANK | | OUTPUT IMPEDANCE PER FUNCTION W/SOURCE ACROSS INPUT | 0.05 OHMS BLANK | | OVERALL HEIGHT | 1.200 INCHES MINIMUM AND 1.300 INCHES MAXIMUM | | OVERALL LENGTH | 4.200 INCHES MINIMUM AND 4.300 INCHES MAXIMUM | | RELATIONSHIP TO SIMILAR EQUIPMENT | SIMLIER TO FILTER RADIO FREQUENCY INTER. P/NM1932;RF15009-2 | | SPECIAL FEATURES | 37 PIN DAU FILTER;TWISTED PAIR-STRAIGHT THROUGH | | SPECIFICATION/STANDARD DATA | 56232-1224373-202 MANUFACTURERS SPECIFICATION CONTROL | | STYLE DESIGNATOR | RECTANGULAR TERMINAL/TERMINALS ON OPPOSITE SURFACES | | TEST DATA DOCUMENT | 56232-1224373 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | UNTHREADED MOUNTING HOLE DIAMETER | 0.120 INCHES MINIMUM AND 0.160 INCHES MAXIMUM |
|
|