|
|
|
National Stock Number:
5915-01-479-7787
Federal Supply Class:
5915
National Item Identification Number:
014797787
Description:
FILTER,RADIO FREQUENCY INTERFERE
Detail:
An item designed to suppress undesired (interfering) frequencies and have a minimal effect on the desired frequencies when inserted in an electrical power circuit. Excludes items which consist of a single capacitor, inductor, resistor, or devices consisting of only two or more circuit elements of the same basic name. Excludes FILTER, LOW PASS and SUPPRESSOR, IGNITION INTERFERENCE. For items designed to be inserted in a line which is primarily intended to carry high frequency waves modulated with signals, such as antenna lead-in, see FILTER, BAND SUPPRESSION and FILTER, BAND PASS. See also LIMITER, ELECTRICAL NOISE.
|
Manufacturer Information:
| 10ED1C | 05245 | TE CONNECTIVITY CORPORATION | | 97012B0344 | 01365 | MARINE CORPS LOGISTICS COMMAND TECHNICAL DATA REPOSITORY CUSTOMER SERVICE-MICC LOGISTICS OPERATIONS CENTER |
|
Techincal Specification:
| BODY LENGTH | 2.620 INCHES MAXIMUM | | BODY WIDTH | 1.190 INCHES MAXIMUM | | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | 1.575 INCHES NOMINAL | | FUNCTIONAL TERMINAL TYPE AND QUANTITY | 3 CONNECTOR, RECEPTACLE INPUT AND 3 QUICK DISCONNECT, MALE OUTPUT | | INCLOSURE TYPE | ENCASED | | LOAD IMPEDANCE PER FUNCTION | 50.0 OHMS BLANK | | OVERALL HEIGHT | 0.810 INCHES MAXIMUM | | OVERALL LENGTH | 2.620 INCHES MAXIMUM | | OVERALL WIDTH | 1.980 INCHES MAXIMUM | | MOUNTING FACILITY TYPE AND QUANTITY | 2 UNTHREADED HOLE | | OPERATING CURRENT RATING PER FUNCTION IN AMPS | 6.0 BLANK AND 10.0 BLANK | | OPERATING VOLTAGE RATING AND TYPE PER FUNCTION | 120.0 VOLTS AC BLANK AND 250.0 VOLTS AC BLANK | | SPECIAL FEATURES | AHBB SHOULD INCLUDE 60 CYCLES AS WELL BUT FIIG WON'T ALLOW IT | | POWER LINE FREQUENCY RATING PER FUNCTION IN HERTZ | 50.0 BLANK | | SOURCE IMPEDANCE RATING PER FUNCTION | 50.0 OHMS BLANK | | STYLE DESIGNATOR | RECTANGULAR TERMINAL/TERMINALS ON OPPOSITE SURFACES | | UNTHREADED MOUNTING HOLE DIAMETER | 0.070 INCHES NOMINAL |
|
|