| ACCOMMODATED FERRULE DIAMETER | 0.250 INCHES NOMINAL |
| ACCOMMODATED FUSE LENGTH | 1.250 INCHES NOMINAL |
| BODY STYLE | BUSHING MOUNTED TYPE |
| BUSHING HOLE DIAMETER | 0.877 INCHES MINIMUM AND 0.882 INCHES MAXIMUM |
| BUSHING THREAD LENGTH | 0.500 INCHES NOMINAL |
| CAP DIAMETER | 0.980 INCHES MINIMUM AND 1.020 INCHES MAXIMUM |
| CURRENT CARRYING RATING IN AMPS | 30.0 |
| FUSE ACCOMMODATION QUANTITY | 1 |
| FUSE TERMINAL TYPE ACCOMMODATED | FERRULE |
| ENVIRONMENTAL PROTECTION | WATERTIGHT |
| FLATTED SIDE BUSHING HOLE LENGTH | 0.816 INCHES MINIMUM AND 0.821 INCHES MAXIMUM |
| INDICATING LAMP VOLTAGE RANGE IN VOLTS | +90.0 TO 250.0 |
| INTERRUPTION INDICATOR METHOD | NEON LAMP |
| LENGTH FROM FRONT PROTRUSION TO MOUNTING SURFACE | 0.940 INCHES NOMINAL |
| LENS COLOR | CLEAR |
| OVERALL DIAMETER | 1.000 INCHES NOMINAL |
| OVERALL LENGTH | 2.595 INCHES NOMINAL |
| PANEL THICKNESS | 0.125 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-P-14, TYPE MAI-60 MIL SPEC SINGLE MATERIAL RESPONSE BODY |
| MATERIAL | COPPER ALLOY TERMINAL |
| MATERIAL | COPPER CONTACT |
| MATERIAL | PLASTIC POLYESTER AND GLASS BODY |
| MOUNTING HOLE STYLE | BUSHING MOUNTING |
| MOUNTING HOLE QUANTITY | 1 |
| PRECIOUS MATERIAL AND LOCATION | CONTACT SURFACES SILVER |
| PRECIOUS MATERIAL | SILVER |
| RESISTOR RATING | 120.0 KILOHMS |
| SCREW THREAD DIAMETER | 0.138 INCHES NOMINAL |
| SCREW THREAD QUANTITY PER INCH | 32.0 |
| SPECIFICATION/STANDARD DATA | 81349-MIL-F-19207/21 GOVERNMENT SPECIFICATION |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-S-365 FED SPEC SINGLE TREATMENT RESPONSE CONTACT |
| SURFACE TREATMENT | SILVER CONTACT |
| TERMINAL TYPE AND QUANTITY | 1 THREADED STUD AND 1 SCREW |
| TEST DATA DOCUMENT | 81349-MIL-F-19207 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| VOLTAGE IN VOLTS | 250.0 |