| ACCOMMODATED FERRULE DIAMETER | 0.813 INCHES NOMINAL |
| ACCOMMODATED FUSE LENGTH | 3.000 INCHES NOMINAL |
| BODY STYLE | PANEL MOUNTED TYPE |
| BUSHING HOLE DIAMETER | 1.755 INCHES MAXIMUM |
| CAP DIAMETER | 1.980 INCHES MINIMUM AND 2.020 INCHES MAXIMUM |
| CENTER TO CENTER DISTANCE BETWEEN OUTSIDE MOUNTING HOLES ALONG LENGTH | 2.370 INCHES MINIMUM AND 2.380 INCHES MAXIMUM |
| CURRENT CARRYING RATING IN AMPS | 60.0 |
| FUSE ACCOMMODATION QUANTITY | 1 |
| FUSE TERMINAL TYPE ACCOMMODATED | FERRULE |
| ENVIRONMENTAL PROTECTION | DRIPPROOF |
| INDICATING LAMP VOLTAGE RANGE IN VOLTS | +90.0 TO 500.0 |
| INTERRUPTION INDICATOR METHOD | NEON LAMP |
| LENGTH FROM FRONT PROTRUSION TO MOUNTING SURFACE | 1.200 INCHES MINIMUM AND 1.240 INCHES MAXIMUM |
| OVERALL DIAMETER | 2.870 INCHES MINIMUM AND 2.880 INCHES MAXIMUM |
| OVERALL LENGTH | 5.445 INCHES MINIMUM AND 5.495 INCHES MAXIMUM |
| PANEL THICKNESS | 0.187 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-M-14, TYPE SDG MIL SPEC SINGLE MATERIAL RESPONSE BODY |
| MATERIAL | PLASTIC POLYHEXAMETHYLENE ADIPAMIDE AND GLASS OR PLASTIC POLYCAPROLACTAM AND GLASS OR PLASTIC POLYHEXAMETHYLENE SEBACAMIDE AND GLASS BODY |
| MOUNTING HOLE DIAMETER | 0.265 INCHES MINIMUM AND 0.270 INCHES MAXIMUM |
| MOUNTING HOLE QUANTITY | 2 |
| MOUNTING HOLE STYLE | BUSHING MOUNTING W/2 HOLES |
| RESISTOR RATING | 160.0 KILOHMS |
| SCREW THREAD DIAMETER | 0.250 INCHES NOMINAL |
| SCREW THREAD QUANTITY PER INCH | 20.0 |
| SPECIFICATION/STANDARD DATA | 81349-MIL-F-19207/5 GOVERNMENT SPECIFICATION |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-S-365 FED SPEC SINGLE TREATMENT RESPONSE CONTACT |
| SURFACE TREATMENT | SILVER CONTACT |
| TERMINAL TYPE AND QUANTITY | 2 THREADED STUD |
| TEST DATA DOCUMENT | 81349-MIL-F-19207 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| VOLTAGE IN VOLTS | 500.0 |