| ACCOMMODATED FERRULE DIAMETER | 0.250 INCHES NOMINAL |
| ACCOMMODATED FUSE LENGTH | 1.250 INCHES NOMINAL |
| BODY STYLE | BUSHING MOUNTED TYPE |
| BUSHING DIAMETER | 0.625 INCHES NOMINAL |
| BUSHING HOLE DIAMETER | 0.625 INCHES MINIMUM AND 0.635 INCHES MAXIMUM |
| BUSHING THREAD LENGTH | 0.420 INCHES MINIMUM AND 0.460 INCHES MAXIMUM |
| CAP DIAMETER | 0.510 INCHES MINIMUM AND 0.550 INCHES MAXIMUM |
| CURRENT CARRYING RATING IN AMPS | 20.0 |
| FUSE ACCOMMODATION QUANTITY | 1 |
| FUSE TERMINAL TYPE ACCOMMODATED | FERRULE |
| ENVIRONMENTAL PROTECTION | DRIPPROOF |
| FLATTED SIDE BUSHING HOLE LENGTH | 0.570 INCHES MINIMUM AND 0.575 INCHES MAXIMUM |
| INDICATING LAMP VOLTAGE RANGE IN VOLTS | +46.0 TO 60.0 |
| INTERRUPTION INDICATOR METHOD | INCANDESCENT LAMP |
| LENGTH FROM FRONT PROTRUSION TO MOUNTING SURFACE | 1.170 INCHES MINIMUM AND 1.210 INCHES MAXIMUM |
| OVERALL DIAMETER | 0.790 INCHES MINIMUM AND 0.830 INCHES MAXIMUM |
| OVERALL LENGTH | 3.290 INCHES MINIMUM AND 3.330 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-M-19833, TYPE GDI-30F MIL SPEC SINGLE MATERIAL RESPONSE BODY |
| MATERIAL | PLASTIC DIALLYL PHTHALATE AND GLASS BODY |
| MOUNTING HOLE STYLE | BUSHING MOUNTING |
| MOUNTING HOLE QUANTITY | 1 |
| RESISTOR RATING | 1.2 KILOHMS |
| SPECIFICATION/STANDARD DATA | 81349-MIL-F-19207/9 GOVERNMENT SPECIFICATION |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-S-365 FED SPEC SINGLE TREATMENT RESPONSE CONTACT |
| SURFACE TREATMENT | SILVER CONTACT |
| SURFACE TREATMENT | SOLDER AND TIN TERMINAL |
| TERMINAL TYPE AND QUANTITY | 2 TAB, SOLDER LUG |
| TEST DATA DOCUMENT | 81349-MIL-F-19207/9 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| VOLTAGE IN VOLTS | 60.0 |