| ACCOMMODATED FERRULE DIAMETER | 0.250 INCHES NOMINAL |
| ACCOMMODATED FUSE LENGTH | 1.250 INCHES NOMINAL |
| BODY STYLE | PANEL MOUNTED TYPE |
| BUSHING HOLE DIAMETER | 0.874 INCHES NOMINAL |
| CENTER TO CENTER DISTANCE BETWEEN BUSHING HOLES | 0.800 INCHES NOMINAL |
| CENTER TO CENTER DISTANCE BETWEEN KEYWAY AND BUSHING HOLE | 0.434 INCHES NOMINAL |
| CENTER TO CENTER DISTANCE BETWEEN OUTSIDE MOUNTING HOLES ALONG WIDTH | 0.938 INCHES NOMINAL |
| CURRENT CARRYING RATING IN AMPS | 30.0 |
| FUSE ACCOMMODATION QUANTITY | 2 |
| FUSE TERMINAL TYPE ACCOMMODATED | FERRULE |
| ENVIRONMENTAL PROTECTION | DRIPPROOF |
| INDICATING LAMP VOLTAGE RANGE IN VOLTS | +81.0 TO 90.0 |
| INTERRUPTION INDICATOR METHOD | INCANDESCENT LAMP |
| LENGTH FROM FRONT PROTRUSION TO MOUNTING SURFACE | 0.798 INCHES MINIMUM AND 0.828 INCHES MAXIMUM |
| OVERALL HEIGHT | 1.812 INCHES MINIMUM AND 1.817 INCHES MAXIMUM |
| OVERALL LENGTH | 3.750 INCHES MINIMUM AND 4.000 INCHES MAXIMUM |
| OVERALL WIDTH | 1.180 INCHES MINIMUM AND 1.185 INCHES MAXIMUM |
| MATERIAL | COPPER ALLOY CONTACT |
| MOUNTING HOLE DIAMETER | 0.156 INCHES NOMINAL |
| MOUNTING HOLE QUANTITY | 2 |
| MOUNTING HOLE STYLE | 2 BUSHING MOUNTING W/2 HOLES |
| RESISTOR RATING | 2.0 KILOHMS |
| SCREW THREAD DIAMETER | 0.164 INCHES NOMINAL |
| SCREW THREAD QUANTITY PER INCH | 32.0 |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-S-365 FED SPEC SINGLE TREATMENT RESPONSE CONTACT |
| SURFACE TREATMENT | SILVER CONTACT |
| TERMINAL TYPE AND QUANTITY | 4 THREADED STUD |
| TEST DATA DOCUMENT | 81349-MIL-F-19207/18D SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| VOLTAGE IN VOLTS | 90.0 |