| ACCOMMODATED FERRULE DIAMETER | 0.406 INCHES NOMINAL |
| ACCOMMODATED FUSE LENGTH | 1.500 INCHES NOMINAL |
| BODY STYLE | PANEL MOUNTED TYPE |
| BUSHING HOLE DIAMETER | 0.771 INCHES MINIMUM AND 0.786 INCHES MAXIMUM |
| CAP DIAMETER | 0.880 INCHES NOMINAL |
| CENTER TO CENTER DISTANCE BETWEEN BUSHING HOLES | 0.994 INCHES MINIMUM AND 1.009 INCHES MAXIMUM |
| CENTER TO CENTER DISTANCE BETWEEN OUTSIDE MOUNTING HOLES ALONG LENGTH | 1.002 INCHES NOMINAL |
| CENTER TO CENTER DISTANCE BETWEEN OUTSIDE MOUNTING HOLES ALONG WIDTH | 0.502 INCHES NOMINAL |
| CURRENT CARRYING RATING IN AMPS | 30.0 |
| FUSE ACCOMMODATION QUANTITY | 3 |
| FUSE TERMINAL TYPE ACCOMMODATED | FERRULE |
| ENVIRONMENTAL PROTECTION | WATERTIGHT AND BODY SEALED |
| LENGTH FROM FRONT PROTRUSION TO MOUNTING SURFACE | 0.560 INCHES NOMINAL |
| OVERALL HEIGHT | 2.880 INCHES NOMINAL |
| OVERALL LENGTH | 2.720 INCHES NOMINAL |
| OVERALL WIDTH | 1.190 INCHES NOMINAL |
| MATERIAL | COPPER ALLOY TERMINAL |
| MATERIAL | COPPER CONTACT |
| MATERIAL | PLASTIC PHENOLIC BODY |
| MOUNTING HOLE DIAMETER | 0.152 INCHES NOMINAL AND 0.781 INCHES NOMINAL |
| MOUNTING HOLE QUANTITY | 3 AND 4 |
| MOUNTING HOLE STYLE | 3 BUSHING MOUNTING W/4 HOLES |
| SCREW THREAD DIAMETER | 0.190 INCHES NOMINAL |
| SCREW THREAD QUANTITY PER INCH | 32.0 |
| SECOND CENTER TO CENTER DISTANCE BETWEEN BUSHING HOLES | 0.994 INCHES MINIMUM AND 1.009 INCHES MAXIMUM |
| SPECIFICATION/STANDARD DATA | 81349-MIL-F-19207/31 GOVERNMENT SPECIFICATION |
| TERMINAL TYPE AND QUANTITY | 3 THREADED STUD AND 3 SCREW |
| TEST DATA DOCUMENT | 81349-MIL-F-19207 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| VOLTAGE IN VOLTS | 500.0 |