|
|
|
National Stock Number:
5920-00-865-3382
Federal Supply Class:
5920
National Item Identification Number:
008653382
Description:
FUSEHOLDER,BLOCK
Detail:
A fuseholder in which the fuseholder stud and/or clips and insulation are mounted on a flat base. Excludes FUSEHOLDER, RECEPTACLE.
|
Manufacturer Information:
| FH23CM | 71400 | COOPER BUSSMANN, LLC | | FH23CM | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MILF21346-3 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| FUSE ACCOMMODATION QUANTITY | 3 | | CURRENT CARRYING RATING IN AMPS | 20.0 | | VOLTAGE IN VOLTS | 250.0 | | FUSE TERMINAL TYPE ACCOMMODATED | FERRULE | | TERMINAL TYPE AND QUANTITY | 6 TAB, SOLDER LUG | | CONTACT MATERIAL | COPPER-BERYLLIUM, QQ-C-530 OR | | COPPER-BERYLLIUM, QQ-C-533 | | CONTACT SURFACE TREATMENT | COPPER AND | | TIN PLATED AND | | ZINC PLATED | | BODY STYLE | CLIP CONNECTED TYPE | | OVERALL LENGTH | 1.600 INCHES MINIMUM AND | | 1.640 INCHES MAXIMUM | | OVERALL HEIGHT | 0.680 INCHES MINIMUM AND | | 0.720 INCHES MAXIMUM | | OVERALL WIDTH | 1.730 INCHES MINIMUM AND | | 1.770 INCHES MAXIMUM | | BASE THICKNESS | 0.230 INCHES MINIMUM AND | | 0.270 INCHES MAXIMUM | | MOUNTING HOLE STYLE | ONE HOLE MOUNTING | | MOUNTING HOLE QUANTITY | 1 | | MOUNTING HOLE DIAMETER | 0.138 INCHES NOMINAL | | ACCOMMODATED FUSE LENGTH | 1.250 INCHES NOMINAL | | ACCOMMODATED FERRULE DIAMETER | 0.250 INCHES NOMINAL | | INTERNAL CIRCUIT CONFIGURATION AND POLE QUANTITY | 3 POLE, MAINLINE, FUSED | | TEST DATA DOCUMENT | 81349-MIL-F-21346 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | TERMINAL MATERIAL | COPPER-BERYLLIUM, QQ-C-530 OR | | COPPER-BERYLLIUM, QQ-C-533 | | TERMINAL SURFACE TREATMENT | SOLDER DIP AND | | TIN PLATED | | BODY MATERIAL | PLASTIC, DIALLYL PHTHALATE, MIL-M-14, TYPE MDG AND | | PLASTIC, DIALLYL PHTHALATE, MIL-M-14, TYPE SDG AND | | PLASTIC, MELAMINE, MIL-M-14, TYPE MME AND | | PLASTIC, SILICONE, MIL-M-14, TYPE MSG |
|
|