|
|
|
National Stock Number:
5920-00-877-9348
Federal Supply Class:
5920
National Item Identification Number:
008779348
Description:
FUSEHOLDER,BLOCK
Detail:
A fuseholder in which the fuseholder stud and/or clips and insulation are mounted on a flat base. Excludes FUSEHOLDER, RECEPTACLE.
|
Manufacturer Information:
| 05G10062-0001 | 25230 | MAGNETEK INC INDUSTRIAL CONTROLS GROUP DIV DBA MAGNETEK | | 265-1265-010 | 13499 | ROCKWELL COLLINS, INC. | | 940-10062-0001 | 04801 | L3HARRIS MARITIME POWER & ENERGY SOLUTIONS, INC | | 3553-1 | 71400 | COOPER BUSSMANN, LLC | | 3553-2 | 71400 | COOPER BUSSMANN, LLC | | 356001 | 75915 | LITTELFUSE, INC. | | VG3241 | 3E191 | RAULAND-BORG CORP | | A-A-55518/2 | 58536 | FEDERAL COMMERCIAL ITEM DESCRIPTION PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC | | AA55518/02-001 | 58536 | FEDERAL COMMERCIAL ITEM DESCRIPTION PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC | | FH22AM | 71400 | COOPER BUSSMANN, LLC | | FH22AM | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | M21346/3-14 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MILF21346-3 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| ACCOMMODATED FERRULE DIAMETER | 0.250 INCHES NOMINAL | | ACCOMMODATED FUSE LENGTH | 1.250 INCHES NOMINAL | | BASE THICKNESS | 0.230 INCHES MINIMUM AND 0.270 INCHES MAXIMUM | | BODY STYLE | CLIP CONNECTED TYPE | | CURRENT CARRYING RATING IN AMPS | 30.0 | | FUSE ACCOMMODATION QUANTITY | 1 | | FUSE TERMINAL TYPE ACCOMMODATED | FERRULE | | INTERNAL CIRCUIT CONFIGURATION AND POLE QUANTITY | 1 POLE, MAINLINE, FUSED | | OVERALL HEIGHT | 0.680 INCHES MINIMUM AND 0.720 INCHES MAXIMUM | | OVERALL LENGTH | 2.360 INCHES MINIMUM AND 2.400 INCHES MAXIMUM | | OVERALL WIDTH | 0.760 INCHES MINIMUM AND 0.800 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-M-14, TYPE MSG MIL SPEC SINGLE MATERIAL RESPONSE AND MIL-M-14, TYPE MDG MIL SPEC SINGLE MATERIAL RESPONSE AND MIL-M-14, TYPE SDG MIL SPEC SINGLE MATERIAL RESPONSE AND MIL-M-14, TYPE MME MIL SPEC SINGLE MATERIAL RESPONSE BODY | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-C-530 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-C-533 FED SPEC SINGLE MATERIAL RESPONSE CONTACT | | MATERIAL | COPPER ALLOY 172 OR COPPER ALLOY 173 OR COPPER ALLOY 170 OR COPPER ALLOY 172 CONTACT | | MATERIAL | PLASTIC SILICONE AND GLASS FIBER AND PLASTIC DIALLYL PHTHALATE AND SILICA AND PLASTIC POLYHEXAMETHYLENE ADIPAMIDE AND GLASS OR PLASTIC POLYCAPROLACTAM AND GLASS OR PLASTIC POLYHEXAMETHYLENE SEBACAMIDE AND GLASS AND PLASTIC MELAMINE AND SILICA BODY | | MOUNTING HOLE DIAMETER | 0.138 INCHES NOMINAL | | MOUNTING HOLE QUANTITY | 1 | | MOUNTING HOLE STYLE | ONE HOLE MOUNTING | | VOLTAGE IN VOLTS | 250.0 | | TERMINAL TYPE AND QUANTITY | 2 SCREW | | TEST DATA DOCUMENT | 81349-MIL-F-21346 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
|
|