| ACCOMMODATED FERRULE DIAMETER | 0.406 INCHES NOMINAL |
| ACCOMMODATED FUSE LENGTH | 1.500 INCHES NOMINAL |
| BODY STYLE | BUSHING MOUNTED TYPE |
| BUSHING DIAMETER | 0.625 INCHES NOMINAL |
| BUSHING HOLE DIAMETER | 0.877 INCHES MINIMUM AND 0.887 INCHES MAXIMUM |
| BUSHING THREAD LENGTH | 0.360 INCHES NOMINAL |
| CAP DIAMETER | 0.860 INCHES MINIMUM AND 0.900 INCHES MAXIMUM |
| CURRENT CARRYING RATING IN AMPS | 30.0 |
| ENVIRONMENTAL PROTECTION | WATERTIGHT AND BODY SEALED |
| FLATTED SIDE BUSHING HOLE LENGTH | 0.815 INCHES MINIMUM AND 0.820 INCHES MAXIMUM |
| FUSE ACCOMMODATION QUANTITY | 1 |
| FUSE TERMINAL TYPE ACCOMMODATED | FERRULE |
| LENGTH FROM FRONT PROTRUSION TO MOUNTING SURFACE | 0.540 INCHES MINIMUM AND 0.580 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-M-14, TYPE SDG MIL SPEC SINGLE MATERIAL RESPONSE BODY |
| MATERIAL | PLASTIC POLYHEXAMETHYLENE ADIPAMIDE AND GLASS OR PLASTIC POLYCAPROLACTAM AND GLASS OR PLASTIC POLYHEXAMETHYLENE SEBACAMIDE AND GLASS BODY |
| MOUNTING HOLE QUANTITY | 1 |
| MOUNTING HOLE STYLE | BUSHING MOUNTING |
| OVERALL DIAMETER | 1.321 INCHES MINIMUM AND 1.346 INCHES MAXIMUM |
| OVERALL LENGTH | 1.670 INCHES MINIMUM AND 1.710 INCHES MAXIMUM |
| PANEL THICKNESS | 0.125 INCHES MAXIMUM |
| SCREW THREAD DIAMETER | 0.190 INCHES NOMINAL |
| SCREW THREAD QUANTITY PER INCH | 32.0 |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-S-365 FED SPEC SINGLE TREATMENT RESPONSE CONTACT |
| SURFACE TREATMENT | SILVER CONTACT |
| TERMINAL TYPE AND QUANTITY | 1 THREADED STUD AND 1 SCREW |
| TEST DATA DOCUMENT | 81349-MIL-F-19207/25 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| VOLTAGE IN VOLTS | 500.0 |