| ACCOMMODATED FUSE LENGTH | 1.000 INCHES MINIMUM |
| ACCOMMODATED FUSE THICKNESS | 0.122 INCHES MINIMUM AND 0.128 INCHES MAXIMUM |
| ACCOMMODATED FUSE WIDTH | 0.715 INCHES MINIMUM AND 0.785 INCHES MAXIMUM |
| BODY STYLE | PANEL MOUNTED TYPE |
| BUSHING HOLE DIAMETER | 2.182 INCHES MINIMUM AND 2.192 INCHES MAXIMUM |
| CAP DIAMETER | 2.480 INCHES MINIMUM AND 2.520 INCHES MAXIMUM |
| CENTER TO CENTER DISTANCE BETWEEN INSIDE MOUNTING HOLES ALONG LENGTH | 0.964 INCHES MINIMUM AND 0.974 INCHES MAXIMUM |
| CENTER TO CENTER DISTANCE BETWEEN BUSHING HOLE AND MOUNTING HOLE | 1.370 INCHES MINIMUM AND 1.380 INCHES MAXIMUM |
| CENTER TO CENTER DISTANCE BETWEEN OUTSIDE MOUNTING HOLES ALONG LENGTH | 1.928 INCHES MINIMUM AND 1.948 INCHES MAXIMUM |
| CENTER TO CENTER DISTANCE BETWEEN OUTSIDE MOUNTING HOLES ALONG WIDTH | 2.350 INCHES MINIMUM AND 2.400 INCHES MAXIMUM |
| CURRENT CARRYING RATING IN AMPS | 1000.0 |
| ENVIRONMENTAL PROTECTION | DRIPPROOF |
| FUSE ACCOMMODATION QUANTITY | 1 |
| FUSE TERMINAL TYPE ACCOMMODATED | KNIFE BLADE |
| INDICATING LAMP VOLTAGE RANGE IN VOLTS | +90.0 TO 500.0 |
| INTERRUPTION INDICATOR METHOD | NEON LAMP |
| LENGTH FROM FRONT PROTRUSION TO MOUNTING SURFACE | 1.870 INCHES MINIMUM AND 1.880 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-M-14, TYPE MAI-60 MIL SPEC SINGLE MATERIAL RESPONSE BODY |
| MATERIAL | PLASTIC AND GLASS BODY |
| MOUNTING HOLE QUANTITY | 3 |
| MOUNTING HOLE DIAMETER | 0.279 INCHES MINIMUM AND 0.283 INCHES MAXIMUM |
| MOUNTING HOLE STYLE | BUSHING MOUNTING W/3 HOLES |
| OVERALL DIAMETER | 2.980 INCHES MINIMUM AND 3.020 INCHES MAXIMUM |
| OVERALL LENGTH | 8.990 INCHES MINIMUM AND 9.010 INCHES MAXIMUM |
| PANEL THICKNESS | 0.250 INCHES MAXIMUM |
| PRECIOUS MATERIAL AND LOCATION | CONTACT SURFACES SILVER |
| PRECIOUS MATERIAL | SILVER |
| RESISTOR RATING | 160.0 KILOHMS |
| SCREW THREAD DIAMETER | 0.312 INCHES NOMINAL |
| SCREW THREAD QUANTITY PER INCH | 18.0 |
| SHORTEST CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH | 0.964 INCHES MINIMUM AND 0.974 INCHES MAXIMUM |
| SPECIFICATION/STANDARD DATA | 81349-MIL-F-19207/6 GOVERNMENT SPECIFICATION |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-S-365 FED SPEC SINGLE TREATMENT RESPONSE CONTACT |
| SURFACE TREATMENT | SILVER CONTACT |
| TERMINAL TYPE AND QUANTITY | 2 THREADED STUD |
| TEST DATA DOCUMENT | 81349-MIL-F-19207 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| VOLTAGE IN VOLTS | 500.0 |