| 0.800 INCHES MAXIMUM |
| LENGTH FROM FRONT PROTRUSION TO MOUNTING SURFACE | 0.530 INCHES MINIMUM AND |
| 0.570 INCHES MAXIMUM |
| BUSHING THREAD LENGTH | 0.120 INCHES MINIMUM AND |
| 0.130 INCHES MAXIMUM |
| MOUNTING HOLE STYLE | BUSHING MOUNTING |
| BUSHING HOLE DIAMETER | 0.625 INCHES MINIMUM AND |
| 0.635 INCHES MAXIMUM |
| FLATTED SIDE BUSHING HOLE LENGTH | 0.570 INCHES MINIMUM AND |
| 0.575 INCHES MAXIMUM |
| MOUNTING HOLE QUANTITY | 1 |
| BUSHING DIAMETER | 0.625 INCHES NOMINAL |
| ACCOMMODATED FUSE LENGTH | 0.498 INCHES MINIMUM AND |
| 0.538 INCHES MAXIMUM |
| INTERRUPTION INDICATOR METHOD | NEON LAMP |
| RESISTOR RATING | 2.0 KILOHMS |
| INDICATING LAMP VOLTAGE RANGE IN VOLTS | 81.0 TO 90.0 |
| ENVIRONMENTAL PROTECTION | DRIPPROOF |
| TEST DATA DOCUMENT | 81349-MIL-F-19207 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| SPECIFICATION/STANDARD DATA | 81349-MIL-F-19207/28 GOVERNMENT SPECIFICATION |
| TERMINAL SURFACE TREATMENT | SOLDER DIP AND |
| TIN PLATED |
| BODY MATERIAL | PLASTIC, DIALLYL PHTHALATE, MIL-M-19833, TYPE GDI-30F |
| PRECIOUS MATERIAL | SILVER |
| PRECIOUS MATERIAL AND LOCATION | CONTACT SURFACES SILVER |
| SPEC/STD CONTROLLING DATA | |
| MANUFACTURERS CODE | 81349 |
| DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | FHL44G6 |
| NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | MIL-PRF-19207/28 |
| FUSE ACCOMMODATION QUANTITY | 1 |
| CURRENT CARRYING RATING IN AMPS | 5.0 |
| VOLTAGE IN VOLTS | 125.0 |
| FUSE TERMINAL TYPE ACCOMMODATED | PIN |
| TERMINAL TYPE AND QUANTITY | 2 TAB, SOLDER LUG |
| CONTACT MATERIAL | ANY ACCEPTABLE |
| BODY STYLE | PANEL MOUNTED TYPE |
| CONTACT SURFACE TREATMENT | SILVER PLATED, QQ-S-365 |
| OVERALL LENGTH | 1.132 INCHES MINIMUM AND |
| 1.179 INCHES MAXIMUM |
| OVERALL DIAMETER | 0.760 INCHES MINIMUM AND |