5925-00-341-5875, CIRCUIT BREAKER

1560-00-341-5874 DUCT ASSEMBLY,HEAT VENT

National Stock Number:
5925-00-341-5875

Federal Supply Class:
5925

National Item Identification Number:
003415875

Description:
CIRCUIT BREAKER

Detail:
A DEVICE WITH MEANS OTHER THAN FUSES FOR AUTOMATICALLY OPENING THE CIRCUIT IN WHICH IT IS INSTALLED WHEN THE CURRENT VARIES FROM THE PREDETERMINED VALUE FOR WHICH THE DEVICE IS SET. MAY INCLUDE PROVISIONS FOR MANUAL OPERATION. AT LEAST ONE SET OF CONTACTS MUST BE IN SERIES WITH THE ACTUATING ELEMENT(S). A COMBINATION OF SEMICONDUCTOR AND PASSIVE DEVICES MAY BE USED IN LIEU OF CONTACTS. FOR AUTOMATICALLY OPERATED ITEMS IN WHICH THE ACTUATING (TRIPPING) ELEMENT AND CONTACTS ARE NOT IN SERIES, SEE RELAY (AS MODIFIED). FOR ITEMS WHICH ARE OPERATED BOTH MANUALLY AND AUTOMATICALLY BUT THE ACTUATING ELEMENTS AND CONTACT ARE NOT IN SERIES, SEE RELAY-SWITCH. EXCLUDES CIRCUIT BREAKER BOX AND MAGNETO "BREAKER" ASSEMBLIES. SEE ALSO SWITCH (AS MODIFIED); AND CONTROLLER.

Manufacturer Information:

2831564	10001	NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER
AM3333MG6-30-125-5-60	74193	EATON CORP HEINEMANN PRODUCTS COMMERCIAL CONTROLS DIV
AM3333MG6-30-125VAC60C5	74193	EATON CORP HEINEMANN PRODUCTS COMMERCIAL CONTROLS DIV

Techincal Specification:

ACTUATOR FUNCTION	TRIP-RESET
ACTUATOR POSITION DESIGNATION	AT EACH POLE
ARC QUENCHING METHOD	MAGNETIC BLOWOUT
BODY LENGTH	2.500 INCHES NOMINAL
BODY STYLE	MULTIPOLE-MULTIPLE ACTUATOR TYPE
BODY WIDTH	3.000 INCHES NOMINAL
BOSS HEIGHT	0.140 INCHES NOMINAL
CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH	1.938 INCHES NOMINAL
CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO WIDTH	0.750 INCHES NOMINAL
CIRCUIT PROTECTION TYPE	OVERCURRENT ALL LOCATIONS
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH	0.750 INCHES NOMINAL
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH	2.062 INCHES NOMINAL
EXTERNAL ACTUATOR LINKAGE ARRANGEMENT	ONE, TWO, THREE, AND FOUR LINKED
FRAGILITY FACTOR	MODERATELY RUGGED
FREQUENCY IN HERTZ	60.0 ALL LOCATIONS
INCLOSURE PROTECTION TYPE FOR WHICH DESIGNED	FUNGUS RESISTANT AND MOISTURE RESISTANT
INTERNAL TRIP RELEASE CONFIGURATION	SERIES TRIP ALL LOCATIONS
MAIN CONTACT TRIPPING MECHANISM TYPE	TRIP FREE
MANUAL ACTUATOR TYPE AND QUANTITY	4 TOGGLE
MATERIAL	PLASTIC CASE
MAXIMUM CONTINUOUS LOAD CURRENT RATING PER POLE	30.0 AMPERES AC ALL LOCATIONS
MAXIMUM INTERRUPTING CAPACITY CURRENT TYPE AND RATING PER POLE IN AMPS	2000.0 AC ALL LOCATIONS
MOUNTING FACILITY TYPE AND QUANTITY	8 THREADED HOLE
MOUNTING SURFACE TO TERMINAL END DISTANCE	2.611 INCHES NOMINAL
NOMINAL THREAD SIZE	0.138 INCHES
OPERATING VOLTAGE TYPE AND RATING PER POLE IN VOLTS	125.0 AC ALL LOCATIONS
POLE QUANTITY	4
RESET METHOD	MANUAL
STORAGE TYPE	GENERAL PURPOSE WAREHOUSE
TERMINAL TYPE AND QUANTITY	8 THREADED STUD
THREAD SERIES DESIGNATOR	UNC
THREAD QUANTITY PER INCH	32
TRIP DELAY TIME IN SECONDS PER RATED CONTINUOUS CURRENT	1.000 MINIMUM AT 125 PCT AND 8.000 MAXIMUM AT 125 PCT AND 0.600 MINIMUM AT 150 PCT AND 1.200 MAXIMUM AT 150 PCT AND 0.300 MINIMUM AT 200 PCT AND 1.000 MAXIMUM AT 200 PCT AND 0.100 MINIMUM AT 300 PCT AND 0.300 MAXIMUM AT 300 PCT ALL LOCATIONS
TRIP RELEASE CHARACTERISTIC	TIME DELAY ALL LOCATIONS
TRIP RELEASE METHOD	MAGNETIC-HYDRAULIC ALL LOCATIONS
ULTIMATE TRIP RATING OF CONTINUOUS CURRENT RATING PER POLE IN PERCENT	150.0 ALL LOCATIONS
UNPACKAGED UNIT WEIGHT	1.125 POUNDS NOMINAL

Click here to Register for Free 30-day Trial